RoHS Single Port RJ45 Connector AR1009-1326I 10/100 Base-T Ethernet Application Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz 0.1VRMS with 8mA DC Bias Rise Time: 2.5nano-seconds from 10 to 90 percent Industrial Temp: -40ºC to +85ºC Contact Factory for Standard Temp. Part Number OCL(uH min) @100KHz/0.1V with 8mA DC Bias Turns Ratio chip: cable (±2%) EMI Fingers LED (L/R) AR1009-1326I 350 1CT:1CT YES G/Y Part Number AR1009-1326I Return Loss (dB Min) Insertion Loss (dB Max) 1-100MHz 1-30MHz 1.0 -18 Cross talk (dB Min) 30-60MHz 60 -80MHz 18-20*LOG(F/30) -12 CMR (dB Min) 0.5-1MHz 10 MHz 30 MHz 50 MHz 100 MHz -50 -50 -40 -35 -30 0.3-1MHz 10 MHz 30 MHz -47 -42 -50 60 MHz 100 MHz -37 -30 HI-POT (VDC) HI-POT Test 1.0mA/3Sec. 2250 1500 Vrms All specifications subject to change without notice. 15.90 AR1009-1326I ALLIED MECHANICAL LED-L LED-R 3.5 13.50 21.35 4.90 3.38 2.54 3.05 8.89 Unless otherwise specified all tolerances are: ± 0.25 in mm 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 02/10/2015 15 www.alliedcomponents.com RoHS Single Port RJ45 Connector AR1009-1326I SCHEMATICS: 1CT:1CT R4 R3 R2 R1 1CT:1CT C1 Unliess Otherwise Specified all tolerances are: ±0.25mm Notes: 1. R1-R4=75 Ohms, 1/16W, 5% Resisitors. 2. C1=1000pF, 2KV Decouping Capacitor. 3. LED Compliant with IEC60825-1 Safety of Laser Products when operated up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW. LED Peak Wavelength: Green=565nm, Yellow=585Nm PCB Layou t: 15.70 10.92 12.65 7.57 11.43 2.54 1.02(4X) 0.61 9 10 8. 89 3.25(2X) 1 1.70(2X) 2. 54 1.27 2.54 3. 05 3.38 4.9 11 12 0.90(8X) 8.89 All Dimensions Tolerances Unless Otherwise Specified are: ±0.05mm Materials and Finish: Housing:Flammability Rating 94V-O. Shell: C2680 Brass, 025mm thick, 30+50u” nickel plating. Mod Jack Contact: Phospher Bronze, 0.35mm thick, Gold Plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 1502/10/2015 www.alliedcomponents.com