RoHS Low Resistance Chip Inductors Dimensions: LRC20L 0.126±0.012 (3.20±0.30) Inches (mm) 0.098±0.008 (2.49±0.20) 0.079±0.008 (2.01±0.20) 0.098±0.008 (2.49±0.20) 0.126±0.012 (3.20±0.30) 0.049 (1.24) 0.098±0.008 (2.49±0.20) 0.078 (1.98) 0.039 (.991) 0.039 (.991) 0.039 (.991) (MHz) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. (MHz) SRF Min. (MHz) RDC ( Ω ) +/-30% Rated Current (A) LRC20L-R15M-RC .15 20 0.1V 400 0.028 1.45 LRC20L-R27M-RC .27 20 0.1V 250 0.034 1.25 LRC20L-R47M-RC .47 20 0.1V 150 0.042 1.10 LRC20L-1R0M-RC 1.0 20 0.1V 100 0.060 1.00 LRC20L-1R5M-RC 1.5 20 0.1V 85 0.063 0.90 LRC20L-2R2M-RC 2.2 20 0.1V 64 0.097 0.79 LRC20L-3R3M-RC 3.3 20 0.1V 55 0.130 0.70 LRC20L-4R7M-RC 4.7 20 0.1V 43 0.150 0.65 LRC20L-6R8M-RC 6.8 20 0.1V 30 0.210 0.60 LRC20L-100M-RC 10 20 0.1V 26 0.30 0.45 LRC20L-120M-RC 12 20 0.1V 31 0.40 0.76 Features • Miniature SMT wire-wound open magnetic path construction inductors with low DCR, high current capacity and High Impedance Characteristics. • Excellent solder heat resistance for flow and reflow soldering methods. • Excellent for use as choke coils in DC/DC converter and DC power supply circuits. Electrical Inductance Range: .15uH to 12uH Tolerance: 20% for all values, Values from 10uh and above are also in 10%, please change the “M” in the part number to a “K” for 10%. Test Frequency: Inductance measured ll on an HP4192 at 1MHz All specifications subject to change without notice. Operating Temp. Range: i-25° to +125ºC Rated Current: Based on Temperature rise not to exceed 35ºC. Inductance Drop 10% typical. Resistance to Soldering Heat: Pre heat: 150ºC ± 10ºC / 1-2 min. Solder temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Physical Packaging: 2000 pieces per 7 inch reel. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 03/17/2015 www.alliedcomponents.com