RoHS COMMON MODE CHOKE FOR ADSL POTS LOW PASS FILTER APPLICATIONS EP Common Mode Choke Design EN60950 Basic Insulation Compliant 250 Vrms SMD design providing compact foot print Industrial Operating Temp: -40ºC to +85ºC Electrical Specifications @25oC Part Number Turns Ratio (10KHz,0.1V) 1-5:8-4 OCL (10KHz,0.1V) 1-5 Hi-Pot VAC DCR 1-5 8-4 8-4 (2mA/2S) AEP114SI 1:1 2% 4mH 7% 4mH 7.5 7% 7.5 max max 1000 All specifications subject to change without notice. MECHANICAL 10.5max 10.3 1.2 2.5 ALLIED AEP114SI 7.5 2.5 YYWW 0.7 SUGGESTED PAD LAYOUT 13.8max 0.13 8 SURFACES 2.5 7.5 10.0max Units:mm Unless otherwise specified all tolerances are: 0.25 in mm SCHEMATICS 1 8 PRI SEC 5 714-665-1140 4 ALLIED COMPONENTS INTERNATIONAL REVISED15 4/02/09 www.alliedcomponents.com