VR www.vishay.com Vishay Dale Thin Film Molded, SOT-23 Thin Film Surface Mount Resistor/Capacitor Network FEATURES • Resistor and capacitor integrated into a Thin Film network • Filters at the source of emissions • More consistent performance characteristics than discretes • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition Vishay’s R/C Network, packaged in the standard SOT-23, can be strategically placed on your PC board to do localized filtering. The R/C Network can be located at the point of emission before transients are carried through the design. The sophisticated process of integrating the Resistor and Capacitor on a single substrate provides you with higher performance and more consistent results over discrete components. A real estate savings will also be gained. Applications include EMI/RFI suppression and AC termination. These networks, in the SOT-23, along with Vishay’s high component count R Networks and R/C Networks in a variety of standard IC packages, provides you with the exact solution for your redesign or new design. Visit our website for the total picture on available R Networks and R/C Networks from our guaranteed stock program. TYPICAL PERFORMANCE RESISTOR CAPACITOR 3 SCHEMATIC 3 C R 1 C R R 1 2 D Tapped Filter 2 C AC Termination 200 10 TCC TOLERANCE 200 20 R () C (pF) D 33 47 C 47 47 A 100 80 Note • Consult application engineering for custom values C C TOLERANCE VR TOOLED VALUES (1) SCHEMATIC 3 TCR R R 2 1 A T Filter STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Tantalum nitride - Pin/Lead Number 3 - Resistance Range 10 to 500 - TCR: Absolute ± 200 ppm/°C 0 °C to + 70 °C TCR: Tracking - - ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and VRMS over + 10 °C to + 70 °C Tolerance: Absolute Power Rating: Resistor 100 mW - Power Rating: Package 1W at + 70 °C - - Stability: Ratio Operating Temperature Range Storage Temperature Range Capacitance Range ESD Protection Breakdown Voltage Revision: 20-Oct-11 0 °C to + 70 °C - - 55 °C to + 125 °C - 10 pF to 80 pF - - - 25 V to 45 V - Document Number: 60088 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VR www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches and millimeters 3 W B T A S H L A1 K J 2 1 Ø JEDEC STANDARD TO-236 DIMENSION INCHES MINIMUM MILLIMETERS MAXIMUM MINIMUM MAXIMUM A 0.027 0.040 0.70 1.02 A1 0.001 0.004 0.02 0.15 B 0.105 0.120 2.67 3.04 S 0.071 0.079 1.80 2.00 W 0.015 0.021 0.38 0.54 L 0.083 1.03 2.10 2.64 H 0.047 0.055 1.20 1.40 T 0.050 0.157 0.13 0.40 J 0.003 0.008 0.089 0.15 K 0.017 0.022 0.44 0.55 Ø 0 8° 0 8° IMPRINTING SCHEMATIC VRA AA VRC AC VRD AD MECHANICAL SPECIFICATIONS Tantalum nitride Capacitive Material Thin film Substrate Material Silicon Body Terminals Plating Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity Marking Resistance to Solvents Precent of Rated Power Resistive Element DERATING CURVE 100 80 60 40 20 0 0.0005" Permanency testing per MIL-STD-202, method 215 - 50 0 25 70 125 150 Ambient Temperature °C PACKAGING INFORMATION MODEL VR Revision: 20-Oct-11 LEADS TAPE AND REEL 3 3000 Document Number: 60088 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VR www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VRD330K470MTF V R D 3 3 GLOBAL MODEL SCHEMATICS VR D = Tapped filter C = AC termination A = T filter 0 K 4 7 0 M T F RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE PACKAGING xxxK/yyyM UF = TUBED First 2 digits are significant figures. Last digit specifies number of zeros to follow e.g. 330K/470M = 330 W 10 % 47 pF 20 % K = 10 % M = 20 % TAPE AND REEL TF = Full reels Historical Part Number example: VRD330K479MT/R (for reference purposes only) VR D 330K 470M T/R MODEL SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 20-Oct-11 Document Number: 60088 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000