TLUR4400, TLUR4401 www.vishay.com Vishay Semiconductors Universal LED in Ø 3 mm Tinted Diffused Package FEATURES • For DC and pulse operation • Luminous intensity categorized • Standard Ø 3 mm (T-1) package • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 19220 PRODUCT GROUP AND PACKAGE DATA • Product group: LED APPLICATIONS • Package: 3 mm • General indicating and lighting purposes • Product series: standard • Angle of half intensity: ± 30° PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TLUR4400 Red 4 15 - 10 - 630 - 10 - 2 3 20 GaAsP on GaP TLUR4400-AS12 Red 4 15 - 10 - 630 - 10 - 2 3 20 GaAsP on GaP TLUR4401 Red 4 - 32 10 - 630 - 10 - 2 3 20 GaAsP on GaP TLUR4401-AS12Z Red 4 - 32 10 - 630 - 10 - 2 3 20 GaAsP on GaP ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLUR4400, TLUR4401 PARAMETER Reverse voltage TEST CONDITION (1) DC forward current Surge forward current tp ≤ 10 μs SYMBOL VALUE UNIT VR 6 V IF 20 mA IFSM 0.5 A Power dissipation PV 60 mW Junction temperature Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -55 to +100 °C Tsd 260 °C RthJA 500 K/W Soldering temperature t ≤ 5 s, 2 mm from body Thermal resistance junction/ambient Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 2.4, 16-Mar-15 Document Number: 83054 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR4400, TLUR4401 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLUR4400, TLUR4401, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLUR4400 IV 4 15 - mcd TLUR4401 IV 4 - 32 mcd nm Luminous intensity IF = 10 mA Dominant wavelength IF = 10 mA λd - 630 - Peak wavelength IF = 10 mA λp - 640 - nm Angle of half intensity IF = 10 mA ϕ - ± 30 - deg Forward voltage IF = 20 mA VF - 2 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. P Q R S T U V W X Y Z 4 6.3 10 16 25 40 63 100 130 180 240 8 12.5 20 32 50 80 125 200 260 360 480 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° IV rel - Relative Luminous Intensity 40 I F - Forward Current (mA) 35 30 25 20 15 10 5 0 0 17517 Fig. 1 - Forward Current vs. Ambient Temperature Rev. 2.4, 16-Mar-15 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 10° 0.4 0.2 0 0.2 0.4 0.6 95 10042 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83054 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR4400, TLUR4401 www.vishay.com Vishay Semiconductors 1.2 IV rel - Relative Luminous Intensity 10 red Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 550 1 0.1 0.01 590 630 670 710 1 750 10 Fig. 3 - Relative Intensity vs. Wavelength 100 IF - Forward Current (mA) 95 10076 λ - Wavelength (nm) 17521 Fig. 5 - Relative Luminous Intensity vs. Forward Current 100 1.6 IV rel - RelativeLuminous Intensity IF - Forward Current (mA) red super red 10 1 red 1.2 0.8 0.4 IF = 10 mA 0 0.1 0 16634 1 2 3 4 5 VF - Forward Voltage (V) Fig. 4 - Forward Current vs. Forward Voltage Rev. 2.4, 16-Mar-15 0 95 10074 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature Document Number: 83054 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR4400, TLUR4401 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Ø 3.2 ± 0.15 A AREA NOT PLANE 5.8 ± 0.3 34.4 ± 0.5 < 0.6 (2.5) 3.4 ± 0.15 4.4 ± 0.3 R1.4 (sphere) Ø 2.9 ± 0.15 + 0.15 2.54 nom. 0.4 - 0.05 1.5 ± 0.5 + 0.2 0.5 - 0.1 technical drawings according to DIN specifications Drawing-No.: 6.544-5255.01-4 Issue: 9; 28.07.14 AMMOPACK REEL DIMENSIONS in millimeters 355 52 max. Tape feed direction Diodes: cathode before anode Transistors: collector before emitter 90 Label 30 Identification label: Vishay/type/group/tape code/production code/quantity Fig. 7 - Reel Dimensions AS12 = cathode leaves tape first AS21 = anode leaves tape first Rev. 2.4, 16-Mar-15 Tape feed direction Diodes: anode before cathode Transistors: emitter before collector 48 45 94 8667-2 948641 Fig. 8 - Tape Direction Note • The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: “+” for anode first, or “-” for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Document Number: 83054 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR4400, TLUR4401 www.vishay.com Vishay Semiconductors TAPE Diodes: anode before cathode Phototransistors: emitter before collector Code 21 Adhesive tape Identification label Reel Diodes: cathode before anode Phototransistors: collector before emitter Code 12 Paper Tape 94 8671 Fig. 9 - LED in Tape TAPE DIMENSIONS in millimeters 12.7 ± 1 “X” 9 ± 0.5 12 ± 0.3 +1 18 - 0.5 3.81 ± 0.7 Ø 4 ± 0.2 0.9 max. 0.6 5.08 + - 0.1 0.6 2.54 + - 0.1 5.08 ± 0.7 6.35 ± 0.7 12.7 ± 0.2 Quantity per: “H” ±2 0.3 ± 0.2 ±1 Measure limit over 20 index-holes: ± 1 Reel (Mat.-no. 1764) 2000 21885 Rev. 2.4, 16-Mar-15 Option Dim. “H” ± 0.5 mm Dim. “X” ± 0.5 mm AS 17.3 - Document Number: 83054 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000