ETC1-1-13 V5 E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz SM-22 package Features • • • Rev. V5 1:1 Impedance ratio Surface mount Tape and reel packaging available 123 Description M/A-COM’s ETC1-1-13 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless application. Parts are packaged in tape & reel 5 4 Product Image Pin Configuration3 Pin No. Function 1 Secondary Dot 2 Not Connected 3 Secondary 4 Primary 5 Primary Dot 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. Ordering Information1,2 Absolute Maximum Ratings 4,5 Part Number Package ETC1-1-13TR 2000 piece reel 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Parameter Absolute Maximum DC Power 250mW DC Current 30mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. ETC1-1-13 V5 E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz Rev. V5 Electrical Specifications: TA = 25°C, VHIGH = 3.0 V, VLOW = 0 V, Z0 = 50 Ω 6 Parameter Test Conditions Test Conditions Units Min Typ Max RF Frequency - 4.5 - 3000 MHz - - - Insertion Loss - 4.5 - 1000 1000 - 2000 2000 - 3000 dB dB dB - 0.32 - 1.0 2.0 3.5 Amplitude Unbalance - 4.5 - 1000 dB - - 1.0 Phase Unbalance - 4.5 - 1000 Degrees - - 20 6. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended). Schematic † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. ETC1-1-13 V5 E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz Rev. V5 Typical Performance Curves Insertion Loss Input Impedance Phase Unbalance Amplitude Unbalance 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.