Alternative Energy

Vishay Intertechnology, Inc.
Alternative Energy
(Solar Energy)
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
ALTERNATIVE ENER G Y
Notes
Alternative
Energy
Solar Energy
More information on the Engineer’s Toolbox, including product datasheet links, can be found at www.vishay.com/ref/et3.
For inquiries, please contact your local sales representative.
Main Inverters up to 50 kW
Micro Inverters
PV Storage / PV Batteries
Junction Boxes
2
3
4
5
Alternative Energy
Key components for
SOLAR ENERGY
Main Inverters
up to 50 kW
Micro Inverters
PV Storage /
PV Batteries
Junction Boxes
THE VISHAY ADVANTAGE
High Working Voltage
Long Useful Life
High Reliability
Safety Approvals
High Surge Current Capability
Wide Operating Temperature
Range-Ruggedized Construction
and more….
1
Alternative Energy
Main Inverters
up to 50 kW
SOLAR ENERGY
RESISTORS
MOSFETs
INDUCTORS
Thin Film Mini-MELF
Resistors
E Series 600 V
Power MOSFET
Low-Profile, High-Current
IHLP® Inductors
MM / SM
SiHG47N60E
IHLP-5050
• Unrivaled surge handling capability,
ultimate stability over lifetime
• AEC-Q200 qualified, approved acc.
EN 140401-803, sulfur resistant,
GREEN product
• High-performance E Series high-voltage
technology, maximum RDS(on) 64 mΩ
• Popular TO-247 packaging, maximum
continuous current of 47 A
• High-current, low-saturation inductor for
DC/DC conversion and filtering
RECTIFIERS
CERAMIC CAPACITORS
OPTOELECTRONICS
High-Voltage Input Rectifier
Diodes, 40 A, 60 A
up to 1600 V
Internal Design Reduces Risk of
Shorts Caused by Board Flex,
High Breakdown Voltage
Optocoupler with Phototransistor
Output and Trigger Current
of IF = 5 mA
40EPSxxPbF / 60EPSxxPbF
MLCC OMD Capacitors
VOL617A
• 150 °C maximum operating junction
temperature
• Very low forward voltage drop
• Polymer termination available for
intensive board flex requirements
• 100 % voltage conditioning available up
to 630 VDC rating (process code “5H”)
• High current transfer ratio, and high
isolation voltage of 5000 VRMS
• Operating temp. from -55 °C to +110 °C
in a 4-pin LSOP, mini-flat package
ESTA POWER CAPACITORS
MODULES
RESISTORS
LVAC Power Capacitors
3-Level Half-Bridge Inverter
Stage, 60 A, 57 A
High-Power, High-Current Grid
Resistors, 1 kW and Larger
• Single-phase and 3-phase capacitors
• Conforms to UL 810 and CSA C22.2
standards
VS-EMF050J60U
GRE1
• Operating frequency 60 kHz to 150 kHz
• UL approved file E78996
• High active mass with good thermal
dissipation
• IP00, IP20, and IP23 rated enclosures
available
MODULES
NON-LINEAR RESISTORS
FILM CAPACITORS
Standard Diodes up to 600 A, up to
2000 V, H/B Configuration
in SUPER MAGN-A-PAK
NTC Thermistors,
Standard Lug Sensors
Metallized Polypropylene
Film DC-Link Capacitor
NTCALUG01A
MKP1848
VSKD270 / VSKD600
• Robust surface temperature sensor
• AEC-Q200 compliant, UL recognized
• High-performance DC-Link capacitor
with high RMS current capabilities
• Automotive Grade AEC-Q200 compliant
PhMKP
View datasheets for these products
www.vishay.com/ref/et3ae1a
2
• High-current capability, high-voltage
(up to 2000 V)
• Industrial standard package
SUPER MAGN-A-PAK
Alternative Energy
Micro Inverters
SOLAR ENERGY
MOSFETs
CERAMIC CAPACITORS
DIODES
N-Channel 150 V
(D-S) MOSFET
AC Line Rated Disc Capacitors,
Class X1, 760 VAC,
Class Y1, 500 VAC
Surface-Mount TransZorb®
Transient Voltage
Suppressors
• ThunderFET® technology with very low
maximum RDS(on) of 18 mΩ and low
gate charge
• Low losses for single-ended switched
mode topologies, PowerPAK® SO-8 pkg.
VY1
SMBJ5.0CA / 1.5SMC540A
• X1 / Y1 safety rating according to IEC
60384-14, 3rd edition
• Highest reliability and lifetime, operating
temperature: -40 °C to +125 °C
• 600 W peak pulse power capability with
a 10/1000 μs waveform
• AEC-Q101 qualified
RESISTORS
ICs
INDUCTORS
Power Metal Strip® Resistors,
Low Value (Down to 0.001 Ω),
Surface-Mount
100 V, Integrated Half-Bridge
Power Stage
Low-Profile, High-Current
IHLP® Inductors
SiC41001
IHLP-6767GZ-5A
WSR
• High power ratings to 5 W in molded
4527 size package
• Molded package with compliant leads
that give superior thermal shock resilience
• 75 V input voltage capable with
integration of 100 V ThunderFET
MOSFETs
• Capable of delivering up to 200 W
continuous power
• Very high current, low saturation inductor
for DC/DC conversion and filtering
• High temperature continuous operation
at 155 ºC
MOSFETs
OPTOELECTRONICS
CERAMIC CAPACITORS
E Series 600 V
Power MOSFET
Optocoupler with Phototransistor
Output and Trigger Current
of IF = 5 mA
IEC 60384-14:2005,
CAN/CSA/cCSAus, and
ANSI/UL CB Certificates
• High-performance E Series high-voltage
technology, maximum RDS(on) 180 mΩ
• Popular D2PAK packaging, maximum
continuous current of 21 A
VOL617A
MLCC SMD Safety Capacitor
• High current transfer ratio, and high
isolation voltage of 5000 VRMS
• Operating temp. from -55 °C to +110 °C
in a 4-pin LSOP, mini-flat package
• Surface-mount design: simpler assembly
and reduced board space requirement
• Available in NP0 (C0G) or X7R dielectrics
FILM CAPACITORS
TANTALUM CAPACITORS
NON-LINEAR RESISTORS
Metallized Polypropylene
Film DC-Link Capacitor
Solid Tantalum Surface-Mount Chip
Capacitors Tantamount®,
Molded Case, Low ESR
VDR Metal Oxide Varistors
High Surge
TR3
• Extended operating temperature
to 125 °C
• UL recognized up to 105 °C
(selected types)
SiR872ADP
SiHB22N60E
MKP1848S
• Slim high-performance DC-Link for lowbuilding-height applications
View datasheets for these products
www.vishay.com/ref/et3ae1b
• Molded tantalum capacitor low ESR
• Automation and control, SMPS, motion
and drives, telecom infrastructure, networking and multiplexer, general purpose
VDRH
3
Alternative Energy
PV Storage /
PV Batteries
SOLAR ENERGY
OPTOELECTRONICS
RESISTORS
CERAMIC CAPACITORS
Widebody IGBT and MOSFET Driver
with High Creepage and Clearance
of 10 mm
High-Ohmic / High-Voltage Metal
Glaze Leaded Resistors
Internal Design Reduces Risk of
Shorts Caused by Board Flex,
High Breakdown Voltage
VOW3120
• UL 1676, VDE 0860, CQC safety
approvals
• High pulse loading capability (10 kV)
MLCC OMD Capacitors
RESISTORS
FILM CAPACITORS
OPTOELECTRONICS
Power Metal Strip® Battery Shunt
Resistor, Very Low Value
Metallized Polypropylene
Film DC-Link Capacitor
WSBS
MKP1848S
Widebody 1 MBd High-Speed
Optocoupler with High Creepage
and Clearance of 10 mm
• Extremely low resistance values:
50 μΩ to 1000 μΩ
• Low thermal EMF, < 3 μV/ºC, for accurate
current sensing
• Slim high-performance DC-Link for lowbuilding-height applications
VOW136
CERAMIC CAPACITORS
OPTOELECTRONICS
NON-LINEAR RESISTORS
AC Line Rated Disc Capacitors
Class X1, 440 VAC,
Class Y2, 300 VAC
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
SMD 0603, Glass Protected
NTC Thermistors
VOM1271
NTCS0603E3...
VY2
• X1 / Y2 safety rating according to IEC
60384-14, 3rd edition
• Highest reliability and lifetime, operating
temperature: -40 °C to +125 °C
• Drive current from primary side LED;
one less external power supply needed
• Isolation test voltage 4500 VRMS and
integrated turn-off circuitry for highspeed switching
• Standard series, AEC-Q200 compliant
• Glass protected with soft terminations
OPTOELECTRONICS
RESISTORS
ALUMINUM CAPACITORS
Widebody 10 MBd High Speed
Optocoupler with High Creepage
and Clearance of 10 mm
Power Metal Strip® Resistors,
Very High Power, Low Value,
Surface-Mount
Aluminum Capacitors, Power,
Ultra Long Life, Snap-In
VOW2611
WSLP
• 8000 V max. transient isolation voltage
• Integrated faraday shield provides very
high input-to-output noise isolation of
40 kV/µs
• Very high power rating to 3 W in
WSLP0603 to WSLP2512 size packages
• Extremely low resistance values from
0.0005 Ω to 0.1 Ω and tolerance of 1 %
• Most popular series; long life snap-in,
up to 500 V at 105 °C
• Custom made parts based on the need
of your application are available on
request
• 10 mm min. external creepage distance,
8000 V max. transient isolation voltage
• 2.5 A peak output current, 45 kV/μs
common mode rejection
View datasheets for these products
www.vishay.com/ref/et3ae1c
4
VR37
• Polymer termination available for
intensive board flex requirements
• 100 % voltage conditioning available up
to 630 VDC rating (process code “5H”)
• 8000 V max. transient isolation voltage
• Integrated Faraday shield provides very
high input-to-output noise isolation of
40 kV/µs
159 PUL-SI
Alternative Energy
Junction Boxes
SOLAR ENERGY
RECTIFIERS
OPTOELECTRONICS
DIODES
Photovoltaic Solar Cell Protection
Schottky Rectifier, Ultra Low
VF = 0.30 V at IF = 5.0 A
Optocoupler with Photodarlington
Output and High CTR
of 100 %
Surface-Mount TransZorb®
Transient Voltage
Suppressors
VSB2045Y
SFH619
SMP TVS
• High junction temperature 230 °C
maximum at DC forward current
• Trench MOS Schottky technology
• High collector emitter voltage,
VCEO = 300 V, high isolation test voltage:
5300 VRMS
• Standard plastic DIP-4 package
• Meets MSL level 1, per J-STD-020C,
LF maximum peak of 260 °C
• Very low profile – typical height of
0.65 mm
CERAMIC CAPACITORS
MOSFETs
RESISTORS
AC Line Rated Disc Capacitors,
Class X1, 760 VAC,
Class Y1, 500 VAC
P-Channel 30 V
(D-S) MOSFET
Power Metal Strip® Resistors,
Low Value (Down to 0.0005 Ω),
Surface-Mount
VY1
• TrenchFET® technology with low
maximum RDS(on) of 9.8 mΩ
• Popular SO-8 package
• X1 / Y1 safety rating according to IEC
60384-14, 3rd edition
• Highest reliability and lifetime, operating
temperature: -40 °C to +125 °C
WSL2512
• Extremely low resistance values from
0.0005 Ω to 0.5 Ω and tolerance of 1 %
• High power of 1 W in 2512 size resistor
MOSFETs
RESISTORS
OPTOELECTRONICS
N-Channel 100 V
(D-S) MOSFET
High-Ohmic / High-Voltage Metal
Glaze Leaded Resistors
SiR846ADP
VR37
Optocoupler with Phototransistor
Output and Trigger Current
of IF = 1 mA
• ThunderFET technology providing
maximum RDS(on) of 7.8 mΩ and low
gate charge
• Efficient high-frequency switching in the
PowerPAK® SO-8 package
®
View datasheets for these products
www.vishay.com/ref/et3ae1d
Si4425DDY
• UL 1676, VDE 0860, CQC safety
approvals
• High pulse loading capability (10 kV)
VOL618A
MOSFETs
MELF RESISTORS
N-Channel 30 V
(D-S) MOSFET
Professional Thin Film
MELF Resistors
SiRA10DP
MMB0207
• TrenchFET Gen IV power MOSFET,
100 % Rg and UIS tested
• Low RDS(on)
• Approved according to EN 140401-803,
AEC-Q200 qualified
• High surge voltage capability
• High current transfer ratio, and high
isolation voltage of 5000 VRMS
• Operating temp. from -55 °C to +110 °C
in a 4-pin LSOP, mini-flat package
5
Vishay Intertechnology, Inc.
www.vishay.com
VMN-MS6981-1501-AESO