NTCAIMME3C90080 Datasheet

NTCAIMME3C90080
Vishay BCcomponents
NTC Thermistors, Long Immersion Sensor with Connector
FEATURES
• Rugged construction
• Temperature measurement accuracy better then
± 1 °C between 50 °C and 100 °C
• Stainless steel housing
• Housing is 100 % watertight
• High number of thermal cycles resistant
(minimum 100 000 cycles)
• Withstanding voltage 500 V (between outer case and
terminals/NTC)
• Male terminals 6.3 x 0.8 type IDC rast 5 mm, or solderless
terminals FASTON (IEC 760 flat quick connections)
• Compliant to RoHS Directive 2002/95/EC
• PVC-free
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
(for information)
11.979K

APPLICATIONS
± 4.99
%
Sensor used for temperature measurement, sensing and
control in:
• Water boilers
• Heating system
• Water and used water systems
• Water and oil tanks
• Consumer appliances
• Industrial appliances
• Solar heating systems
Tolerance on R25
B25/85-value
3740
K
Tolerance on B25/85-value
± 0.75
%
Operating temperature range
at zero power
- 25 to + 125
°C
Thermal time constant
 63.2 % (25 °C to oil 85 °C)
15
s
1704

±2
%
Resistance at 80 °C
Tolerance on R80-value
DESCRIPTION
Min. dielectric withstanding
voltage between the metallic
housing and the
terminals/NTC
500
VAC
Thermistor NTC sensor, with a negative temperature
coefficient, measured in accordance with IEC 60539.
Maximum power dissipation
150
mW
MOUNTING
Climatic category
(LCT/UCT/days)
Weight
• O-Ring
• U-Clip or spring
• Rast 5 mm 2 poles connector (refer to polarisation detail),
or female FASTON for 6.3 x 0.8 terminals or equivalents
25/125/56
19
g
DESIGN-IN SUPPORT
• Other resistance and tolerances values available on
request
• Other connector polarizations available on request
• Available with insulated leads instead of connector
• Detailed mounting drawing or 3D solid model available on
request
• Available with RTD platinum elements Pt500 or Pt1000
sensor
ELECTRICAL DATA AND ORDERING INFORMATION
SAP MATERIAL AND
ORDERING NUMBER
NTCAIMME3C90080
OLD 12NC CODE
R25-VALUE
(Ω)
B25/85-VALUE
(K)
SPQ
(PIECES)
2381 645 90080
11 979
3740
100
Ordering information can be found on: www.vishay.com/doc?33036
Document Number: 29117
Revision: 16-May-11
For technical questions, contact: [email protected]
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCAIMME3C90080
NTC Thermistors, Long Immersion
Sensor with Connector
Vishay BCcomponents
DIMENSIONS in millimeters
12.60
1a
1b
2b
15.60
Ø D5
Ø D4
Ø D3
Ø D2
2d
1c
6.30
Ø D1
1.
0.80
2.
L2
02C
3.
L3
L1
90080a
1.
2.
Thermistor
NTC position
Stainless steel
housing
3.
L1
Connector
153.5 ± 3
L2
118
L3
Ø D1
19
5
+ 0.05/- 0.02
Ø D2
Ø D3
Ø D4
Ø D5
6
8.1 ± 0.1
(O-Ring)
8
(Clip)
11
+ 0.05/- 0.02
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES
TEMP.
(°C)
RT/R25
RESISTANCE
()
R/R
(%)

(%/K)
T
(K)
Rmin.
()
Rmax.
(W)
- 25
10.819
129 600
8.86
- 5.52
1.60
118 123
141 078
- 20
8.244
98 762
8.40
- 5.35
1.57
90 465
107 058
- 15
6.335
75 887
7.96
- 5.19
1.53
69 844
81 930
- 10
4.907
58 777
7.54
- 5.03
1.50
54 344
63 210
-5
3.829
45 874
7.14
- 4.88
1.46
42 600
49 147
0
3.011
36 067
6.75
- 4.74
1.42
33 634
38 500
5
2.384
28 557
6.37
- 4.60
1.38
26 738
30 376
10
1.900
22 765
6.01
- 4.47
1.34
21 398
24 132
15
1.525
18 266
5.66
- 4.34
1.30
17 233
19 299
20
1.231
14 748
5.32
- 4.22
1.26
13 964
15 532
25
1.000
11 979
4.99
- 4.10
1.22
11 382
12 577
30
0.8170
9787
4.67
- 3.99
1.17
9329
10 244
35
0.6712
8040
4.37
- 3.88
1.13
7689
8391
40
0.5543
6640
4.07
- 3.77
1.08
6370
6911
45
0.4602
5513
3.78
- 3.67
1.03
5304
5721
50
0.3839
4599
3.50
- 3.58
0.98
4438
4760
55
0.3218
3855
3.23
- 3.48
0.93
3731
3980
60
0.2710
3247
2.97
- 3.39
0.88
3150
3343
65
0.2293
2746
2.72
- 3.30
0.82
2672
2821
70
0.1947
2333
2.47
- 3.22
0.77
2275
2391
75
0.1661
1990
2.23
- 3.14
0.71
1945
2034
80
0.1422
1704
2.00
- 3.06
0.65
1670
1738
85
0.1223
1465
2.23
- 2.99
0.75
1432
1497
1295
90
0.1055
1264
2.45
- 2.92
0.84
1233
95
0.09135
1094
2.66
- 2.85
0.93
1065
1123
100
0.07936
950.7
2.87
- 2.78
1.03
920.7
980.7
105
0.06918
828.8
3.07
- 2.71
1.13
800.4
857.2
110
0.06050
724.8
3.27
- 2.65
1.23
698.0
751.5
115
0.05307
635.8
3.46
- 2.59
1.34
610.7
660.9
120
0.0467
559.4
3.65
- 2.53
1.44
535.9
582.9
125
0.04121
493.6
3.83
- 2.47
1.55
471.7
515.5
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 29117
Revision: 16-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCAIMME3C90080
NTC Thermistors, Long Immersion
Sensor with Connector
Vishay BCcomponents
RELIABILITY DATA
CONDITIONS
R25/R25
(typical)
T = 125 °C
t = 1000 h
<1%
Damp heat storage (steady state)
IEC 60068-2-78
T = 85 C (air)
85 % RH
t = 56 days
<1%
Rapid temperature cycling (air)
IEC 60068-2-14
T1 = - 40 °C
T2 = 125 °C
t < 15 s
10 000 cycles
<1%
Rapid temperature cycling (oil)
T1 = 25 °C
T2 = 80 °C
100 000 cycles
<1%
TEST
Dry heat storage (steady state)
IEC 60068-2-2
TYPICAL THERMAL CYCLING RELIABILITY
Thermal Cycling + 25 °C/+ 80 °C
2.0
Min.
Average
Max.
1.5
ΔR 25/R 25 ini (%)
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
10
Document Number: 29117
Revision: 16-May-11
100
1000
10 000
For technical questions, contact: [email protected]
100 000
Cycles
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000