SOGC 45, 46 www.vishay.com Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount FEATURES • TTL/ECL translator and signal terminator schematics available Available • 0.110" (2.79) maximum seated height • Rugged, molded case construction • 0.050" (1.27) lead spacing • Reduces total assembly costs Available • Compatible with automatic surface mounting equipment • Uniform performance characteristics • Meets EIA PDP 100, SOGN-0003 outline dimensions • Available in tube pack or tape and reel pack • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CIRCUIT SCHEMATIC 45 46 45 46 SOGC16 SOGC20 POWER RATING POWER RATING PACKAGE ELEMENT P70 °C P70 °C W W 0.1 1.6 0.1 1.6 0.1 2.0 0.1 2.0 TOLERANCE ±% RESISTANCE VALUES 2 2 2 2 180, 270, 820 330, 150, 330 180, 270, 820 330, 150, 330 MAXIMUM WORKING VOLTAGE (1) VDC 50 50 50 50 TEMPERATURE COEFFICIENT ± ppm/°C 100 100 100 100 Note (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Package power rating (maximum at +70 °C) TCR tracking (-55 °C to +125 °C) Voltage coefficient of resistance Maximum operating voltage Operating temperature range Storage temperature range UNIT W ppm/°C ppm/V VDC °C °C S0GC16 1.6 SOGC20 2.0 ± 50 < 50 typical 50 -55 to +125 -55 to +150 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOGC1646DC (preferred part numbering format) S O G C 1 6 4 6 D C GLOBAL MODEL PIN COUNT SCHEMATIC PACKAGING SPECIAL SOGC 16 20 45 = TTL/ECL translator 46 = SIGNAL terminator EJ = Lead (Pb)-free, tube EA = Lead (Pb)-free, tape and reel Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable DC = Tin/lead, tube RZ = Tin/lead, tape and reel Historical Part Number Example: SOGC1646 (will continue to be accepted) SOGC 16 46 D02 HISTORICAL MODEL PIN COUNT SCHEMATIC PACKAGING Note • For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540). Revision: 12-Sep-13 Document Number: 31507 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOGC 45, 46 www.vishay.com Vishay Dale MECHANICAL SPECIFICATIONS Marking Model number, schematic number, value, tolerance, pin 1 indicator, date code Marking resistance to solvents Permanency testing per MIL-STD-202, method 215 Maximum solder reflow temperature +255 °C Solderability Per MIL-STD-202, method 208E Terminals Copper alloy. Solder dipped terminal Body Molded epoxy DIMENSIONS in inches (millimeters) B 0.105 (2.67) 0.050 (1.27) Non-Accum. Typ. 0.018 (0.457) Typ. 0.010 ± 0.005 (0.254 ± 0.127) 0.100 (2.54) 0.406 ± 0.012 (10.31 ± 0.305) 0.295 (7.49) SOGC 0.006 (0.152) Max. Typ. Pin 1 0.045 (1.14) 0.045 (1.14) Ref. A 0.028 ± 0.010 (0.711 ± 0.254) Typ. 0.008 (0.203) GLOBAL MODEL A B SOGC16 0.440 (11.18) 0.350 (8.89) SOGC20 0.540 (13.72) 0.450 (11.43) CIRCUIT APPLICATIONS 45 Schematic VCC TTL Inputs 180 Ω 270 Ω 820 Ω Pin 1 VCC Outputs to ECL TTL to ECL translator The SOGCxx45 network consists of resistors of 3 different values, internally divided into 6 or 8 identical three (3) resistor sections for TTL to ECL translation. VEE 46 Schematic 330 Ω 150 Ω 330 Ω SCSI-BUS signal terminator The SOGCxx46 network consists of resistors of 2 different values, internally divided into 7 or 9 identical three (3) resistor sections for SCSI-BUS terminator applications. Pin 1 Revision: 12-Sep-13 Document Number: 31507 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOGC 45, 46 www.vishay.com Vishay Dale Power Rating (W) SOGC20 Pkg. 2.0 SOGC16 Pkg. 1.6 1.0 Single Resistor 0.10 -50 Derating 0 +25 +70 +125 +150 Ambient Temperature °C PERFORMANCE TEST MAX. R (TYPICAL TEST LOTS) Power conditioning ± 0.50 % R Thermal shock ± 0.50 % R Short time overload ± 0.25 % R Low temperature operation ± 0.25 % R Moisture resistance ± 0.50 % R Resistance to soldering heat ± 0.25 % R Shock ± 0.25 % R Vibration ± 0.25 % R Load life ± 0.50 % R Terminal strength Insulation resistance Dielectric withstanding voltage ± 0.25 % R 10 000 M (minimum) No evidence of arcing or damage (200 VRMS for 1 min) Note • Test methods per MIL-STD-202. Revision: 12-Sep-13 Document Number: 31507 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000