Optoway TRS-5020G 1 *********************************************************************************************************************************************************************** TRS-5020G / TRS-5020TG / TRS-5020FG / TRS-5020CG / TRS-5020CTG / TRS-5020CFG 5V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l The TRS-5020G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 / SDH STM-4 (S-4.1). This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. l l l l l l l l l l Duplex SC Single Mode Transceiver: TRS-5020G Duplex ST Single Mode Transceiver: TRS-5020TG Duplex FC Single Mode Transceiver: TRS-5020FG Intermediate-Reach SONET OC-12 / SDH STM-4 (S-4.1) Compliant Industry Standard 1 x 9 Footprint Single +5 V Power Supply RoHS Compliant PECL Signal Detection Output: TRS-5020G TTL Signal Detection Output: TRS-5020CG 0 to 70oC Operating: TRS-5020G -40 to 85oC Operating: TRS-5020AG LED Multisourced 1 x 9 Transceiver Interchangeable Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l ATM 622 Mbps Links l SONET/SDH Equipment Interconnect l Fiber Channel 532 Mbps Links ORDER INFORMATION P/No. Bit Rate SONET Distance Wavelength Voltage (Mb/s) /SDH (km) (nm) (V) TRS-5020G TRS-5020AG 622 622 IR-1 IR-1 20 20 1310 1310 5 5 Package Temp. (oC) TX RX Sens. RoHS Power (dBm) Compliant (dBm) 1X9 SC/ST/FC 0 to 70 -8 to -14 -28 Yes 1X9 SC/ST/FC -40 to 85 -8 to -14 -28 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Output Current Iout Min -40 0 -40 Units o C o C 0 GND Max 85 70 85 260 6 Vcc 0 30 mA Min 4.75 0 -40 50 Typ 5 Max 5.25 70 85 o C V V Notes TRS-5020G TRS-5020AG 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Icc 622 240 Units V o C / TRS-5020G o C / TRS-5020AG Mb/s mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2006 V1.0 Optoway TRS-5020G 2 *********************************************************************************************************************************************************************** Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Symbol Min Typ Max Units Notes Po -14 ---8 dBm 1 1274 1310 1355 nm λ ----4 nm RMS (σ) ∆λ ER 8.2 ----dB Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 tr 1.2 ns 10% to 90% Values tf 1.2 ns 10% to 90% Values RIN -116 dB/Hz TJ 0.55 ns 2 IIL IIH V IH - VIL V IL - V CC V IH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74 µA µA mV V V 3 3 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Max Units Notes --Pin Pa Pd ---3 ---40 1.0 1100 --- -28 ---28 --- dBm dBm dBm dBm dB nm 1 VOL - V CC VOH - V CC VOL - V CC VOH - V CC VSDL VSDH -2.0 -1.1 -2.0 -1.1 2.0 --------- 1600 -1.58 -0.74 -1.58 -0.74 0.8 V V V V V V Transition: low to high Transition: high to low 2 2 TRS-5020G TRS-5020CG Notes: 1. Minimum sensitivity and saturation levels at BER1E-10 for a 2 23-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2006 V1.0 Optoway TRS-5020G 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) PIN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD Rx Vcc Tx Vcc TD− TD+ Tx GND N/C TOP VIEW N/C Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +5V dc power for the receiver section +5V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2006 V1.0 Optoway TRS-5020G 4 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm 1) SC Type TX OPTICAL RX OPTICAL TRS-5020G / TRS-5020CG / TRS-5020AG / TRS-5020ACG 2) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-5020-EMG / TRS-5020C-EMG / TRS-5020A-EMG / TRS-5020AC-EMG ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2006 V1.0 Optoway TRS-5020G 5 *********************************************************************************************************************************************************************** 3) ST Type TX OPTICAL RX OPTICAL TRS-5020TG / TRS-5020CTG / TRS-5020ATG / TRS-5020ACTG 4) FC Type 12.7 TX OPTICAL RX OPTICAL 2.54*8 20.32 O1.3 20.32 13.7 10 10.18 0.75 5.97 13.9 25.4 34.5MAX TRS-5020FG / TRS-5020CFG / TRS-5020AFG / TRS-5020ACFG Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2006 V1.0