LED SPECIFICATION 599MR2C Features： Single color High bright output Descriptions： Dice material：AlGaInP Emitting Color：Super Bright Red Large view angle Device Outline：φ5mm Round Flat Top Low power consumption Lens Type：Water Clear High reliability and long life HALF LIGHT PATTERN: 1. All dimensions are millimeters：mm. 2. Tolerance is +/-0.25mm unless otherwise noted. Page: 1 of 3 LED SPECIFICATION 599MR2C Absolute maximum ratings（Ta = 25℃） Parameter Symbol Test Condition Reverse Voltage VR Forward Current Values Unit Min. Max. IR = 30μA 5 -- V IF ---- ---- 30 mA Power Dissipation Pd ---- ---- 75 mW Pulse Current Ipeak Duty=0.1mS，1kHz ---- 100 mA Operating Temperature Topr ---- -20 +85 ℃ Storage Tstr ---- -25 +100 ℃ Temperature Electrical and optical characteristics（Ta = 25℃） Parameter Symbol Test Condition Forward Voltage VF Reverse Current Values Unit Min. Typ. Max. IF=20mA ---- 2.0 2.5 V IR VR=5V ---- ---- 30 μA Dominate Wavelength λd IF=20mA 620 624 630 nm Peak Wavelength λp IF=20mA ---- 632 ---- nm Spectral Line half-width Δλ IF=20mA ---- 20 ---- nm Luminous Intensity IV IF=20mA 2θ1/2 IF=20mA Viewing Angle ---- Luminous Intensity Bins（Ta = 25℃） BIN ---- mcd 100 ---- deg. Unit:mcd Bin N P Q R Min 200 280 390 550 Max 280 390 550 770 Page: 2 of 3 LED SPECIFICATION 599MR2C Typical electrical/optical characteristic curves： FORWARD CURRENT Vs FORWARD VOLTAGE 2.5 40 30 20 10 0 1.5 1.7 1.9 2.1 2.3 Forward Voltage(V) 10 40 60 80 Relative Luminous Intensity Ambient Temperature TA (℃) 0.5 0 Relative Luminous Intensity 20 20 1.0 0 10 20 30 40 IF-Forward Current (mA) 50 2.5 30 0 1.5 LUMINOUS INTENSITY Vs. AMBIENT TEMPERATURE 40 0 2.0 2.5 FORWARD CURRENT DERATING CURVE 50 Forward Current(mA) LUMINOUS INTENSITY Vs. FORWARD CURRENT Luminous Intensity Relative Value at IF=20mA Forward Current(mA) 50 100 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 Ambient Temperature TA (℃) 100 100 75 50 25 0 450 500 550 650 600 Wavelength λ(nm) 700 750 Page: 3 of 3