Tyco/Electronics PRODUCT: RXE005 Raychem Circuit Protection DOCUMENT: SCD 24363 PCN: 718115 REV LETTER: F REV DATE: OCTOBER 23, 2001 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: Released Electrical Rating Voltage: 60V MAX Current: 40A MAX Insulating Material: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 26 AWG Tin Lead Plated Nickel-Copper Alloy Marking: TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -8.0 -8.3 -(0.315) -(0.325) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 2.8 (0.110) TABLE II. PERFORMANCE RATINGS: IH RATED CURRENT AMPERES 20°C HOLD 0.05 CURRENT RATINGS TIME TO TRIP AMPERES AMPERES AMPERES SECONDS AT 0°C AT 20°C AT 60°C AT 20°C, 0.5A HOLD TRIP HOLD TRIP HOLD TRIP MAX 0.06 0.12 0.05 0.10 0.03 0.07 5.0 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: INITIAL RESISTANCE VALUES ONE-HOUR NOMINAL POST-TRIP TRIPPED-STATE RESISTANCE POWER STANDARD TRIP DISSIPATION OHMS OHMS WATTS AT AT 20°C AT 20°C 20°C MIN MAX MAX NOMINAL 7.3 11.1 20.0 0.22 UL, CSA, TUV recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.