AT65-0413 Digital Attenuator 15.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz Rev. V8 Features • • • • • Attenuation: 1.0 dB steps to 15 dB Low DC Power Consumption Integral TTL Driver 50 Ohm Impedance Temperature Stability: ±0.18 dB from –40°C to +85°C Typ. • SOIC-16 Package Schematic with Off-Chip Components or Functional Block Diagram Description M/A-COM’s AT65-0413 is a GaAs FET 4-bit digital attenuator with a 1.0 dB minimum step size and a 15 dB total attenuation range. This device is in a SOIC16 plastic surface mount package. The AT65-0413 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. Typical applications include dynamic range setting in precision receiver circuits and other gain/ leveling control circuits. Ordering Information Pin Configuration Part Number Package Pin No. Function Pin No. Function AT65-0413 Bulk Packaging 1 GND 9 C2 AT65-0413TR 1000 piece reel 2 RF1 10 C1 AT65-0413-TB Sample Test Board 3 GND Note: Reference Application Note M513 for reel size information. 1. 11 GND 4 NC 1 12 GND 5 Vee 13 NC1 6 Vcc 14 GND 7 C4 15 RF2 8 C3 16 GND NC = No Connection 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0413 Digital Attenuator 15.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz Rev. V8 Electrical Specifications: TA = 25°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss — DC - 0.5 GHz DC - 2.0 GHz DC - 3.0 GHz dB dB dB — — — 1.3 1.7 1.9 1.6 2.1 2.4 Attenuation Accuracy Any Bit or Combination of Bits DC - 3.0 GHz dB ± (.25 + 3% of attenuation) or ± .55 dB ± (.25 + 3% of attenuation) or ± .55 dB ± (.25 + 3% of attenuation) or ± .55 dB VSWR Full Range DC - 3.0 GHz Ratio — — 1.6:1 Trise, Tfall Ton, Toff Transients 10% to 90% 50% Cntl to 90%/10% RF In-Band 10% to 90% 50% Cntl to 90%/10% RF In-Band nS nS mV — — — 10 30 35 50 150 — 1 dB Compression Input Power Input Power 0.05 GHz 0.5 - 3.0 GHz dBm dBm — — +20 +28 — — Input IP3 Two-tone inputs up to +5 dBm 0.05 GHz 0.5 - 3.0 GHz dBm dBm — — +40 +50 — — Input IP2 Two-tone inputs up to +5 dBm 0.05 GHz 0.5 - 3.0 GHz dBm dBm — — +45 +68 — — Vcc VEE — — — V V 4.5 -8.0 5.0 -5.0 5.5 -4.75 VIL VIH LOW-level input voltage HIGH-level input voltage — — V V 0.0 2.0 — — 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND — uA -1.0 — 1.0 Icc (Quiescent Supply Current) Vcntrl = VCC or GND — uA — 250 400 ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 IEE VEE min to max, Vin = VIL or VIH — mA -1.0 -0.2 — Absolute Maximum Ratings 2,3 Parameter Max. Input Power 0.05 GHz 0.5 - 3.0 GHz VCC 2. 3. 4. 2 Recommended PCB Configuration Absolute Maximum +27 dBm +34 dBm -0.5V ≤ VCC ≤ +7.0V VEE -8.5V ≤ VEE ≤ +0.5V VCC - VEE -0.5V ≤ VCC - VEE ≤ 14.5V Vin4 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0413 Digital Attenuator 15.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz Rev. V8 Truth Table (Digital Attenuator) Handling Procedures Please observe the following precautions to avoid damage: C1 C2 C3 C4 Attenuation 0 0 0 0 Loss, Reference Static Sensitivity 1 0 0 0 1.0 dB Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 0 1 0 0 2.0 dB 0 0 1 0 4.0 dB 0 0 0 1 8.0 dB 1 1 1 1 15.0 dB 0 = TTL Low; 1 = TTL High Typical Performance Curves Attenuation Accuracy @ +25ºC Typical Insertion Loss (dB) + 2 5 °C - 4 0 °C + 8 5 °C 8 dB 2.5 Deviation from Nom. Attenuation (dB) 2 Loss (dB) 15d B 1.5 1 0.5 1d B 4 dB 1.5 2.0 2.5 0.2 0 -0.2 -0.4 0 0.0 0.5 1.0 1.5 2.0 2.5 0.0 3.0 0.5 1.0 Attenuation Accuracy @ -40ºC 4 dB 2 dB 3.0 Fre que ncy (GHz ) Fre que ncy (GHz ) Attenuation Accuracy @ +85ºC 1d B 8 dB 15d B 2 dB 1d B 0.4 4 dB 8 dB 15d B 0.4 0.2 Deviation from Nom. Attenuation (dB) Deviation from Nom. Attenuation (dB) 2 dB 0.4 0 -0.2 -0.4 0.0 0.5 1.0 1.5 2.0 Fre que ncy (GHz ) 2.5 3.0 0.2 0 -0.2 -0.4 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Fre que ncy (GHz ) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0413 Digital Attenuator 15.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz Rev. V8 Typical Performance Curves RF1 VSWR vs. Frequency 2 & 4 dB RF 2 VSWR vs. Frequency Inser t io n Lo ss 1 d B 15 15 d B 8 dB I nser t i o n Lo ss 1 dB 2 , 4 & 8 dB 1.5 1.3 1.4 VSWR VSWR 1.2 1.3 1.2 1.1 1.1 1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Fre que ncy (GHz ) 1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Fre que ncy (GHz ) SOIC-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.