D6KB6L GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 600 Volts - 6.0 Amperes D3K FEATURES ● Glass passivated chip junction .057(1.45) R2 .276(7.0) .252(6.4) .484(12.3) .461(11.7) .437(11.1) .413(10.5) ldeal for printed circuit board MACHANICAL DATA Method 208C ● Case:UL-94 Class V-0 recognized Flane Retardant Epoxy ● Polarity:Polarity symbol marked on body ● Mounting position:any .055(1.4) .039(1.0) .059(1.5) .043(1.1) .484(12.3) .461(11.7) .055(1.4) .047(1.2) ● Terminal:Plated leads solderable per MIL-STD 202E, .134 .122 (3.4) (3.1) ● High surge current capability .130(3.3) .114(2.9) .110(2.8) .094(2.4) .555(14.1) .531(13.5) .024 (0.6) ● High case dielectric strength .094(2.4) .071(1.8) .049(1.25) .041(1.05) .034(0.86) .026(0.66) .024(0.6) .016(0.4) .162 .162 .162 .138 .138 .138 (4.11)(4.11)(4.11) (3.51)(3.51)(3.51) 1 2 3 4 1 + 2 3 ~ ~ 4 - Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS D6KB6L UNIT VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC Blocking Voltage VDC 600 V I(AV) 6 A IFSM 150 A VF 0.92 V 2 It 93 A2s RθJa 55 with heatsink RθJC 127 without heatsink RθJL Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Rectified Output Current @ TC=140℃ (with heatsink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave SYMBOL Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 3.0A DC 2 I t Rating for Fusing (t<8.3ms) Maximum Typical Thermal Resistance without heatsink Maximum DC Reverse Current @ Ta =25℃ at Rated DC Blocking Voltage @ Ta =125℃ Operating Temperature Range Storage Temperature Range IR ℃/W 15 10.0 500 μA TJ -55 to +150 ℃ TSTG -55 to +150 ℃ REV. 2, 18-Aug-2015 RATING AND CHARACTERTIC CURVES D6KB6L FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 3.0 180 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT 2.5 2.0 1.5 1.0 0.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.0 0.1 0 20 40 60 100 80 120 140 150 160 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 120 80 40 0 1 CASE TEMPERATURE, °C 5 2 10 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.5-TYPICAL REVERSE CHARACTERISTICS 20.0 INSTANTANEOUS REVERSE CURRENT ,(uA) 100.0 INSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 1.0 0.1 TJ=25°C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 TJ=150°C 10.0 TJ=125°C 1.0 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE. VOLTS The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! REV. 2, 18-Aug-2015