Data Sheet Mechanical Drawing Dot for pin 1 Item Inductance (HP-4284A) Leakage Inductance TP07161 4 RD158 Transformer NOV-10-2010 OPP9984 1011-961P -Specification Pins Spec 4–1 SRF 95 uH max 4–1 4.2 Ohm max 5–2 42 mOhm max 10 – 8 19 mOhm max 4–1 1000 kHz min 4–1 Voltage Ratio & 5–2 Phasing Test 10 – 8 1 2 3 120 mV +/- 3 mV 0.8 dia unit:mm Sample Test Data Test Condition 100 kHz, 0.4 Vrms, series 25 deg C 10 kHz, i/p: 4 – 8 = 1240 mV, short (1– 5, 2 – 10) 1500Vac, 60Hz,1 mA, 1 minute Schematic Remark Footprint 1 WD2=Primary AWG#36 105Ts 10 9 8 7 6 1 2 3 4 5 1) This is RoHS compliant product. 15.5 4 5 WD4=Bias AWG#30x4 6Ts 6 3000Vac, 60Hz,1 mA, 1 minute (1,2,3,4,5) to Core WD3=Bias AWG#30x4 6Ts 5 5 70 mV +/- 3 mV 10,8 to Core 3 4 1050 mV +/- 3 mV (1,2,3,4,5) – (10,8) Hi – Pot 2.5 MIN 1.074 mH +/- 10% 100 kHz, 0.4 Vrms, series 4 – 1 short (8,10) DCR 16.0 MAX TP07161 YYWW General Information Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) 20.0 MAX 17.5 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 10 WD5=Secondary TIW#22 7Ts 8 2 WD1=Shield AWG#35x3 15Ts 3.25 TOP VIEW NC Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 4 Description Initial release unit:mm PRD CHK Emily APP Date NTFY Cha. Cha. L. L. Chou 2010/11/10 2010/11/10 __________________________ Customer Signature PAGE 1 OF 1