Data Sheet Mechanical Drawing Dot for pin 1 Item Inductance (HP-4284A) Leakage Inductance TP07160 2 RD157 Transformer NOV-10-2010 OPP10663 1011-960P -Specification Pins Spec 3–5 DCR SRF 2.5 MIN 1 2 3 4 3 – 5 short (8,10) 130 uH max 3–5 5.5 Ohm max 1–4 42 mOhm max 10 – 8 19 mOhm max 3–5 500 kHz min 8 0.8 dia unit:mm Sample Test Data Test Condition 100 kHz, 0.4 Vrms, series 25 deg C 1280 mV +/- 3 mV 120 mV +/- 3 mV 10 kHz, i/p: 3 – 8 = 1470 mV, short (5– 1, 4 – 10) 70 mV +/- 3 mV (1,2,3,4,5) – (10,8) 3000Vac, 60Hz,1 mA, 1 minute 10,8 to Core (1,2,3,4,5) to Core 1500Vac, 60Hz,1 mA, 1 minute Footprint Schematic Remark 5 WD2=Primary AWG#36 128Ts 9 8 7 6 1 2 3 4 5 This is RoHS compliant product. 15.5 10 3 1 10 WD3=Bias AWG#30x4 6Ts 2 5 5 2.58 mH +/- 10% 100 kHz, 0.4 Vrms, series 3–5 Voltage Ratio & 1–4 Phasing Test 10 – 8 Hi – Pot 16.0 MAX TP07160 YYWW General Information Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) 20.0 MAX 17.5 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 WD5=Secondary TIW#22 7Ts WD4=Bias AWG#30x4 6Ts 8 3.25 4 TOP VIEW unit:mm WD1=Shield AWG#29 23Ts NC Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 2 Description Initial release PRD CHK Emily APP Date NTFY Cha. Cha. L. L. Chou 2010/11/10 2010/11/10 __________________________ Customer Signature FORM NO. : I10105-01 PAGE 1 OF 1