Data Sheet Mechanical Drawing 10.41 max S–F Isat S–F 10.92 max TOP VIEW unit:mm Sample Test Data Test Condition 1.3 uH +/- 18% 100 kHz, 0.25Vrms, series 1.3 mOhm +/- 10% 25 deg C 45A max Schematic Recommended PCB Layout Remark 1. 2.8 S 2. 3. 4. 2.6 F 8.0 Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 5.4 max DCR 13.46 max S–F 2.54 2.4 Customer IN07081 Part Number 0 Revision Inductor Description AUG-07-2009 Date -Reference Doc Control # -Issue(For ICE use only) -Specification Item Pins Spec Inductance IN07081 YYWW General Information 0.76 5.6 ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 Rev. 0 Description Initial release 5. 6. 7. 8. Isat is the current at which the inductance drops by 30% typical. Meets UL94V-0 This is RoHS compliant product. The part should come in tape & reel on mass production. Lead out flatness should be within 4 mils. Lead outs should be tinned all sides. Inductance vs. Current Curve as attached. The max operating temperature is 150degC (ambient + temperature rise). unit:mm PRD CHK APP Date NTFY Emily L. L. Chou 2009/8/7 2009/8/7 Gary __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN07081 Inductance VS Current Inductance(%) 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 35 40 45 50 Current (DC) PAGE 2 OF 2