Data Sheet Mechanical Drawing IN09011 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 10.3 MAX 11.6 MAX General Information Item IN09011 0 Inductor JUL-21-2009 ---Specification Pins Spec Inductance @0Adc S - F Inductance @40Adc S-F at 25degC DCR S-F 6.3 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) 1.1 1.5+/-0.1(X2) 7.85 +/- 0.5 0.12 mm for co-planarity 5.7 +/- 0.3 unit:mm Sample Test Data Test Condition 380 nH +/- 10% 100 kHz, 1Vrms, series 100 kHz, 1Vrms, series 290 nH min (42Adc) 0.65mOhm +/- 5% +25 deg C Isat at 25degC S-F 42 Adc Isat at +125degC S-F 35 Adc Recommended PCB Layout 3.1 Schematic S 8.3 F 8.3 Remark 1. Isat is the current at which the inductance drops by 15%. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 3. This is RoHS compliant product. 4. The operating temperature is 130degC max (ambient + temperature rise). 5. Inductance vs. Current Curve as attached. unit:mm Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/7/21 2009/7/21 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N:IN09011 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 Current (A) PAGE 2 OF 2