Data Sheet Mechanical Drawing IN07003 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 10.4 MAX General Information Item 5.0 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN07003 0 Inductor AUG-07-2009 ---Specification Pins Spec Inductance @0Adc S - F Inductance @Isat at S-F 25degC 13.0 MAX 1.5+/-0.1(X2) 1.8+/-0.3 0.12 max for coplanarity 5.7+/-0.25 unit:mm Sample Test Data Test Condition 400 nH +/- 15% 270 nH min 500kHz, 0.1Vrms, series 500kHz, 0.1Vrms, series (40Adc) 0.60 mOhm typical +25 deg C (0.70 mOhm max) 40 Adc max DCR S-F Isat at 25degC S-F Isat at 125degC S-F 33 Adc max Idc S-F 38 Adc max Schematic Recommended PCB Layout 1. 3.1 S 3.0 Isat is the current at which the inductance drops by 15%. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 3. This is RoHS compliant product. 4. Inductance vs. Current Curve as attached. 8.3 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Remark Rev. 0 Description Initial release unit:mm PRD CHK APP Date NTFY Emily L. L. Chou 2009/8/7 2009/8/7 Gary __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN07003 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 Current (A) PAGE 2 OF 2