ISM63 Series - ILSI America, Inc.

5 mm x 7 mm Ceramic Package SMD Oscillator,
LVCMOS / LVPECL / LVDS
Product Features
Applications
Small Surface Mount Package
Fast Sample Delivery
Frequencies to 1500 MHz
Pb Free/ RoHS Compliant
Leadfree Processing
xDSL
Broadcast video
Wireless Base Stations
Sonet /SDH
WiMAX/WLAN
Server and Storage
ISM63 Series
Ethernet/LAN/WAN
Optical modules
Clock and data recovery
FPGA/ASIC
Backplanes
GPON
5.0
Frequency
LVCMOS
LVPECL
LVDS
10 MHz to 250 MHz
10 MHz to 1500 MHz
10 MHz to 1500 MHz
Output Level
LVCMOS
LVPECL
LVDS
VOH=90% VDD min., VOL=10 % VDD max.
VOH=VDD-1.03V max. (Nom. Load), VOL=VDD-1.6V max. (Nom. Load)
VOD=(Diff. Output) 350mV Typ.
Duty Cycle
LVCMOS
LVPECL
LVDS
50% ±5% @ 50%VDD
50% ±5% @ 50%*
50% ±5% @ 50%*
Rise / Fall Time
LVCMOS
LVPECL
LVDS
3.0 ns max. (90%/10%)*
0.6 ns max. (80%/20%)*
0.6 ns max. (80%/20%)*
Output Load
LVCMOS
LVPECL
LVDS
15pF
50  to VDD - 2.0 VDC
RL=100 /CL=10pF
Frequency Stability
See Table Below
0.2
7.0 0.3
1.9 Max.
5.08
7
1
.
1
1.4
Recommended Pad Layout
5.08
4.2
2.0
3.3 VDC ± 10%, 2.5VDC ± 5%
Supply Voltage
1.9
Bypass =0.01 uF
Current
LVCMOS = 45 mA max., LVPECL = 65 mA max., LVDS = 35 mA max.
Phase Jitter (RMS)
At 12kHz to 20 MHz
0.9 ps typical
Operating Temp.
Range
See Table Below
Storage
-40 C to +100 C
Part Number Guide
Package
ISM63
Input
Voltage
Pin
1
2
3
4
5
6
Connection
Enable/Disable or N.C.
Enable/Disable or N.C
Ground
Output
Output or N.C.
VDD
Dimension Units: mm
Sample Part Number:
Operating
Temperature
Stability
(in ppm)
ISM63–31A3H1–155.520
Output
Enable / Disable
Complimentary
Ouput (Pin 5) **
3 = 3.3V
1 = 0 C to +70 C
F = 20
3 = LVCMOS
H = Enable (Pin 1)
1 = N.C.
6 = 2.5V
3 = -20 C to +70 C
A = 25
8 = LVDS
K = Enable (Pin 2)
2 = Output
2 = -40 C to +85 C
B = 50
9 = LVPECL
Frequency
-155.520 MHz
NOTE: A 0.01 µF bypass capacitor is recommended between VDD (pin 6) and GND (pin 3) to minimize power supply noise. * Measured as percent of
waveform. ** Available on LVDS and LVPECL ouput only.
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 11/06/13_F
Page 1 of 3
5 mm x 7 mm Ceramic Package SMD Oscillator,
LVCMOS / LVPECL / LVDS
ISM63 Series
Typical Application:
Pb Free Solder Reflow Profile:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = N.A. (package does not contain plastic, storage life is
unlimited under normal room conditions).
Termination = e4 (Au over Ni over W base metalization).
Tape and Reel Information:
Quantity per
Reel
A
B
C
D
E
F
1000
16 +/-.3
8 +/-.2
7.5 +/-.2
17.5 +/-1
50 / 60 / 80
180 / 250
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 11/06/13_F
Page 2 of 3
5 mm x 7 mm Ceramic Package SMD Oscillator,
LVCMOS / LVPECL / LVDS
ISM63 Series
Environmental Specifications
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Marking
Line 1: ILSI and Date Code (YWW)
Line 2: Frequency
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 11/06/13_F
Page 3 of 3