G1588 Global Mixed-mode Technology 10-CH Level Shifter Integrated with Gate Power Features General Description Input Supply Range: 2.6V~5.5V The G1588 integrated one VGON boost converter with a high voltage level shifter. This device is suitable for GOA TFT-LCD panel applications. Current Mode Boost Controller for VGON Fixed 600kHz Switching Frequency Integrated 45V/1.5A,1.3Ω Switching NMOS The VGON boost converter is a current mode regulator with a temperature compensation feature. The output voltage is adjusted according to the voltage on the VT pin (temperature reading) and the voltage level is set by voltage reference on the END pin. This boost converter has an integrated 45V/1.3Ω NMOS switch and a fixed 600kHz switching frequency. It provides fast transient response to pulsed loading while achieving efficiency over 85%. Input voltage, VINP=4.5V to 15V Output Voltage, VGON = 17V to 39V Up 80% Efficiency (5mA < Load Current) Up 75% Efficiency (100mA < Load Current) 2% Output Regulation Built-In Power on Sequence and Soft Start Function Protection Function Input Under Voltage Lockout (UVLO) Thermal Overload Protection (TOP)(150°C) Output Over Voltage Protection for VGON The level shifters transform the logic-level controlled signals, which are generated by the display timing controller (TCON), into the high-level signals needed by LCD panel. Different CKH1~6 output patterns will be generated by different external settings. Each channel of level shifter output uses low impedance transistors to achieve fast rising and falling time, even when driving the capacitive loads present in LCD applications. (OVP) (39V) Over Current Protection for VGON (OCP) (1.5A typ.) Output Under Voltage Protection (UVP) (FBG≦0.8V) Thermal Compensation Function VGON temperature compensation Vcom temperature compensation 10-Channel Level Shifter +45V Highest Voltage Level -30V Lowest Voltage Level Maximum 700ns Rising/Falling Time 500mA Peak Current 20mA Continuous Current 40-pin, TQFN(5mmx5mm) Package RoHS Compliant G1588 can also be used as a stand-alone level shifter. Connecting SHD to GND can disable whole boost function, shut down function, temperature compensation function, UVP, OCP except for XON function. G1588 features extensive protection functions that include UVLO, OVP, UVP, OCP and OTP. The device operates over the temperature range of -40°C to +85°C. G1588 is available in a 5mmx5mm 40-lead TQFN Package. Applications GOA TFT-LCD Panel Ordering Information ORDER NUMBER MARKING TEMP. RANGE PACKAGE (Green) G1588RG1U 1588 -40°C~+85°C TQFN5X5-40 Note: RG:TQFN5X5-40 1: Bonding code U: Tape & Reel TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.4 Oct 03, 2013 1 G1588 Global Mixed-mode Technology COMPG FBG PGND 33 31 32 VT REF 34 END 36 35 VIN SET4 37 39 38 VCE VST 40 Pin Configuration 1 30 LXG LC 2 29 PMS ROTATE 3 28 SET1 RATIO 4 27 SET2 VCOMADJ 5 26 SET3 AGND 6 25 SHD GOAL 7 24 XON 8 23 VSS 9 22 VGOFF 10 21 VGON NC STH1 LC1 16 17 18 19 20 CKH2 CKH1 LC2 NC 15 NC CKH3 13 14 CKH4 12 CKH5 11 STH2 Thermal Pad CKH6 TERMINATE G1588 TQFN5X5-40 Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation. Typical Application GF106 30K TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.4 Oct 03, 2013 2