Optoway SPS-9350V-2TG 1 *********************************************************************************************************************************************************************** SPS-9350V-2TG (RoHS Compliant) 1550 nm / 3 Gb/s Medium Power Dual Optical SM Transmitter ********************************************************************************************************************************************************************** DESCRIPTION FEATURES l SMPTE 297-2006 Compatible l Speed from 50 Mbps to 3Gbps with up to 50 km Single-mode Fiber l Distance up to 50 km for 3G-SDI l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l Dual Transmitter with Duplex LC l Based on Industry Standard SFP l Two Independent TTL Laser Disable Input l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-9350V-2TG is a dual channel optical single mode transmitter module designed to transmit optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Each transmitter can transmit signal from 50 Mbps to 3 Gbps with up to 50 km of single-mode fiber when using the SPS-9110V-2RG as the receiver. A maximum distance of 50 km is achievable with 3Gbps pathological signals. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. SPS-9350V-2TG Type 2-TX TX λ Power (nm) (dBm) 50 to 3000 1550 DFB 4 to 0 RX Bit Rate (Mb/s) λ (nm) Package Temp (oC) RoHS Compliant LC SFP 0 to 70 Yes Package Temp (oC) RoHS Compliant LC SFP LC SFP LC SFP LC SFP 0 to 70 0 to 70 0 to 70 0 to 70 Yes Yes Yes Yes Sen. (dBm) RELATED PRODUCTS P/No. SPS-9110V-2RG SPS-9350V-1TG SPS-9110V-1RG SPS-9350V-1T1RG Type 2-RX 1-TX 1-RX 1-TX+1-RX Bit Rate (Mb/s) TX λ (nm) 50 to 3000 50 to 3000 1550 DFB 50 to 3000 50 to 3000 1550 DFB Power (dBm) RX λ Sen. (nm) (dBm) 1260/1620 0 to -20 4 to 0 4 to 0 1260/1620 0 to -20 1260/1620 0 to -20 LINK DISTANCE Transmitter Receiver SDI Bit Rate Max. Link Distance (km) SPS-9350V-2TG or SPS-9350V-1TG or SPS-9350V-1T1RG SPS-9110V-2RG or SPS-9110V-1RG or SPS-9350V-1T1RG 3G-SDI HD-SDI SD-SDI 2.97Gbps 1.485Gbps 270Mbos 50 50 50 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V1.0 Optoway SPS-9350V-2TG 2 *********************************************************************************************************************************************************************** Absolute Maximum Ratings Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc Min -40 0 0 --- 5 Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.13 0 50 Max 85 70 4 1 95 Units o C o C V KV HBM % RH Typ 3.3 Max 3.47 70 3000 300 200 Notes non-condensing Units / Notes V o C Mb/s mA Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Optical Rise Time / Fall Time Electrical Differential Input Voltage Disable Input Voltage -- Low Disable Input Voltage -- High SCL, SDA 1. 2. Symbol Min Po λ ∆λ SMSR ER RIN 0 1480 --30 5 tr / tf V IH - VIL VTDIS,L VTDIS,H V OH V OL 200 0 2.0 2.5 0 Typ Max Units Notes 4 1580 1 -120 135 270 800 1.5 dBm nm nm dB dB dB/Hz ps ps ps ns 1 1550 1200 0.8 Vcc+0.3 Vcc+0.3 0.5 mVp-p V V V V 7.5 -20 dB width 2, SMPTE 424M 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled Output power is power coupled into a 9/125 µm single mode fiber. 20% to 80%, unfiltered. MODULE DEFINITION Module Definition PIN 5 PIN 6 Interpretation by Host 4 SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V1.0 Optoway SPS-9350V-2TG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM Vee NC NC Vee SCL SDA Vee TX2+ TX2TX2_DIS PIN 1 2 3 4 5 6 7 8 9 10 Name Vee NC NC Vee SCL SDA Vee TX2+ TX2TX2_DIS Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground Positive Transmitter Data In (2) Negative Transmitter Data In (2) Transmitter Disable (2) 11 12 13 14 15 16 17 18 19 20 Vee NC NC Vee Vcc TX2 Vcc TX1 Vee TX1+ TX1TX1_DIS Signal Ground No Connection No Connection Signal Ground Power Supply (2) Power Supply (1) Signal Ground Positive Transmitter Data In (1) Negative Transmitter Data In (1) Transmitter Disable (1) TX1_DIS TX1TX1+ Vee Vcc TX1 Vcc TX2 Vee NC NC Vee Notes AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX2_DIS = HIGH. +3.3V±5%, Internal connected AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX1_DIS = HIGH. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V1.0 Optoway SPS-9350V-2TG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC 1 VCC 3.3V 2 3 10K 10K 4 5 I2C CLK 6 I2C DATA 7 TD + 8 100Ω Differential Re-Clocker TD - TX2_DIS 9 10 Vee TX1_DIS NC TX1 - NC TX1 + Vee Vee SCL Vcc_TX1 SDA Vcc_TX2 Vee TX2 + Vee NC TX2 - NC TX2_DIS Vee 20 TX1_DIS TD - 19 100Ω Differential 18 17 16 Re-Clocker TD + 100nF 10uF 100nF 10uF 1uH VCC 3.3V 15 1uH 14 13 100nF 10uF 12 11 1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs are internally biased and may not need external bias resistor. PACKAGE DIAGRAM (Units in mm) *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V1.0 Optoway SPS-9350V-2TG 5 *********************************************************************************************************************************************************************** Revision History Version 1.0 Subject Initial datasheet Release Date 2009/1/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V1.0