Manual Switches Electronic Control Rocker AML24 Series INCANDESCENT OR NON-LIGHTED DISPLAY FEATURES 1 Silver or gold contacts. 1 2 or 3 position operation. 1 UL recognized, CSA certified. 1 Lamps can be furnished installed or ordered separately. 1 Lamp circuit independent of switch circuit. Electrical Data Rockers Lamps Accessories Mounting Dimensions * * *AML24 Series: 1 pole and 2-pole only. Rocker operators ordered separately. AML24 ORDER GUIDE page 19 page 51 page 58 pages 56, 57 pages 59, 62 AML24 E B A 2 AA 01 Housing Type Bezel Color Incandescent Lamp Type Terminal Type Circuitry Codes Operating Action AML24 E Rectangular Non-Lighted B Black A No Lamp Installed 2 .110 × .020 (Solder or Quick-Connect) Insert Code letters as shown in Circuitry Chart Insert Code numbers from Operating Action Chart AML24 F Rectangular 1 Lamp Ckt. (A) B 6 V Lamp* C 14 V Lamp* AML24 G Rectangular 2 Lamp Ckts. 3 .025 × .025 (Printed Ckt., or Push-on) E 28 V Lamp* * Lamps will be installed per each lamp circuit specified in the Housing Type. Example: AML24EBA2AA01 Rectangular non-lighted rocker switch housing; black bezel; .110 × .020 terminals; with one circuit ON and one circuit OFF in each extreme operator position (maintained). 1 The ‘‘MICRO SWITCH’’ identification is shown on this side of the switch housings. CIRCUITRY Silver Contacts Gold Contacts AA BA 2-Position OPERATING ACTION 3-Position 2-Position: Maint. AC BC (Non-illuminated switches only) CA Mom. Maint. DA DC Mom. Maint. (Non-illuminated switches only) 30 Maint. Maint. Mom. 3-Position: Maint. CC 01 None 02 None 03 None Mom. 04 Maint. 05 Maint. 06 Maint. 07 Maint. Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada Maint. Mom. Mom. Maint. Manual Switches Electronic Control Rocker LED DISPLAY AML26 Series FEATURES 1 Identical to AML24, except furnished with one or two rectangular high efficiency LED’s which give flush display area and wide angle indication. 1 Available with or without diode protection for LED’s. 1 LED circuit independent of switch circuit. Electrical Data Rockers Lamps and LEDs Accessories Mounting Dimensions page 19 page 52 page 58 page 57 pages 59, 62 1 5 thru 24 VDC LED devices have internal resistor to maintain current at nominal 20 mA. 1 UL recognized, CSA certified. Rocker operators ordered separately. * * LEDs are not replaceable. *AML26 Series: 1 pole and 2-pole only. AML26 ORDER GUIDE AML26 F B B 2 AA 01 R X Housing Type Bezel Color LED Voltage Terminal Type/ Diode Protection Circuitry Codes Operating Action LED Color (LED A) LED Color (LED B) AML26 F 1 LED B Black B V* 2 .110 × .020 (Solder or Quick-Connect Insert code letters as shown in Circuitry Chart Insert code numbers from Operating Action Chart R Red Y Yellow G Green X No LED R Red Y Yellow G Green X No LED AML26 G 2 LED’s C 5V D 10 V E 15 V 8 .110 × .020 w/Diode for LED protection LED version available only with AA BA CA DA circuitry Manuals F 24 V 3 .025 × .025 (Printed Ckt., or Push-On) * See LED application information for devices without current-limiting resistor, page 58. Example: AML26FBB2AA01RX Rectangular rocker switch; illuminated with one LED, this device has a black bezel, .110 × .020 terminals; with one circuit ON and one circuit OFF in each extreme operator position (maintained). Rocker ordered separately 1 The ‘‘MICRO SWITCH’’ identification is shown on this side of the switch housings. Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 31