DFC Flat Battery support Super Capacitors APPLICATIONS Extends battery life up to 3 times Handheld devices DC motors RFID systems Pulse power Automatic Meter Readers GPS Medical equipment FEATURES High Capacitance Non explosive Low ESR Operating Temperature Range Storage Temperature Capacitance Tolerance WVDC Surge voltage SVDC High current pulses ( 3A MAX) High power density High Voltage Very fast charge/discharge cycling Environmentally friendly Compact size -40°C to +70°C 1.4 1.6 2.1 2.4 ESR Leakage Current ESR Change over temperature 3.5 4.0 -10°C to +40°C, 45 to 75% R.H. +80%/-20% @ 20°C 4.2 5.5 6.3 9 12 4.8 6.3 7.2 10.4 13.8 See part listing 1 kHz, 25°C See part listing (4 hrs,25°C) 150% of nominal at 70°C (typical) 200% of nominal at 70°C (Maximum) 1000 hours at 70°C and rated voltage Life time Capacitance change +30% of initially measured values ESR <200% of specified maximum value Leakage current < 200 % of specified maximum value 1000 hours at 70C with no voltage applied Shelf Life Capacitance change +30% of initially measured values ESR <200% of specified maximum value Leakage current < 200 % of specified maximum value 1000 cycles with 115% of rated voltage applied for 10 seconds then short units for 10 seconds Surge Test Capacitance change +30% of initially measured values ESR <200% of specified maximum value Leakage current <200 % of specified maximum value 1000 hours at 70°C and 90-95% RH with no voltage applied Humidity Test Capacitance change +10% of initially measured values ESR <150% of specified maximum value Leakage current <150 % of specified maximum value 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor Standard part listing ESR AC LC (μA) Specific Energy Gravimetric DENSITY (mWh/kg) Specific Energy Volumetric Density (mWh/l) Weight (grams) Volume (mL) Dims LxHxT (mm) Lead Spacing (mm) 24.12 0.0757 1.6 0.51 12.5x12x3.4 8 8 VDC IC PART NUMBER Max current (A) (mΩ, 1kHz) Max stored energy (mWh) 6.3 702DFC6R3Z 0.0221 1200 0.0386 4 0.008 5.5 802DFC5R5Z 0.022 240 0.0336 4 24 0.0773 1.4 0.435 12.5x12x2.9 0.01 4.2 103DFC4R2Z 0.021 720 0.0245 4 18.85 0.0628 1.3 0.39 12.5x12x2.6 8 0.012 3.5 123DFC3R5Z 0.021 600 0.0204 4 15.7 0.0567 1.3 0.36 12.5x12x2.4 8 0.012 6.3 123DFC6R3Z 0.0378 600 0.0662 6 34.82 0.0832 1.9 0.795 12.5x12x5.3 8 11 Cap (F) 0.007 0.015 12 153DFC012Z 0.09 445 0.3000 10 46.88 0.1134 6.4 2.646 17.5x28x5.4 0.016 5.5 163DFC5R5Z .044 500 .0672 6 35.38 .0846 1.9 .795 12x12x4.8 8 0.02 4.2 203DFC4R2Z 0.042 360 0.0490 6 30.63 0.0838 1.6 0.585 12.5x12x3.9 8 0.025 3.5 253DFC3R5Z 0.0438 300 0.0425 6 26.6 0.0834 1.6 0.51 12.5x12x3.4 8 0.03 5.5 303DFC5R5Z 0.0825 280 0.1260 8 37.07 0.0883 3.4 1.428 17.5x17x4.8 11 0.035 6.3 353DFC6R3Z 0.1103 23 0.1929 10 36.4 0.1158 5.3 1.666 17.5x28x3.4 11 0.04 4.2 403DFC4R2Z 0.084 180 0.0980 8 29.7 0.0845 3.3 1.1603 17.5x17x3.9 11 0.04 4.2 403DFC4R2ZH28 0.084 170 0.0980 12 23.33 0.1053 4.2 0.931 17.5x28x1.9 11 0.04 5.5 403DFC5R5Z 0.11 200 0.1681 10 35 0.1106 4.8 1.519 17.5x28x3.1 11 0.05 3.5 503DFC3R5Z 0.0875 150 0.0851 8 25.78 0.0841 3.3 1.0115 17.5x17x3.4 11 0.05 4.2 503DFC4R2Z 0.105 150 0.1225 10 27.22 0.0962 4.5 1.274 17.5x28x2.6 11 0.06 3.5 603DFC3R5Z 0.105 130 0.1021 10 23.74 0.0868 4.3 1.176 17.5x28x2.4 11 0.07 6.3 703DFC6R3Z 0.2205 115 0.3859 20 61.3 0.1458 6.3 2.646 17.5x28x5.4 11 0.08 2.1 803DFC2R1Z 0.084 90 0.0490 8 15.3 0.0659 3.2 0.7438 17.5x17x2.5 11 0.08 5.5 803DFC5R5Z 0.22 100 0.3361 20 58.97 0.1429 5.7 2.352 17.5x28x4.8 11 0.1 4.2 104DFC4R2Z 0.21 75 0.2450 20 45.4 0.1282 5.4 1.911 17.5x28x3.9 11 0.12 3.5 124DFC3R5Z 0.21 65 0.2042 20 77.2 0.1225 5.3 1.666 17.5x28x3.4 11 0.12 12 124DFC012Z 0.72 70 2.4000 65 38.52 0.1782 31.1 13.469 30.5x48x9.2 22.3 0.165 9 164DFC009Z 0.7425 50 1.8563 65 73.66 0.1761 25.2 10.541 30.5x48x7.2 22.3 0.245 6.3 244DFC6R3Z 0.7718 35 1.3506 65 62.24 0.1741 21.7 7.7592 30.5x48x5.3 22.3 0.28 5.5 284DFC5R5Z 0.77 30 1.1764 65 55.5 0.1674 21.2 7.0272 30.5x48x4.8 22.3 0.35 4.2 354DFC4R2Z 0.735 25 0.8575 65 42.88 0.1502 20 5.7096 30.5x48x3.9 22.3 0.42 3.5 424DFC3R5Z 0.735 20 0.7146 65 36.65 0.1436 19.5 4.9776 30.5x48x3.4 22.3 0.7 2.1 704DFC2R1Z 0.735 11 0.4288 65 23.18 0.1171 18.5 3.66 30.5x48x2.5 22.3 Flat pin (Gull Wing) versions available upon request. Add V3L to end of part number for Gull wing leads. 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor Lead styles Radial Leaded Flat pin (Gull Wing) Lead spacing vs. length (mm) Length (L) 12.5 17.5 Lead spacing (S) 8 11 Lead Length (LL) 2.7 3.7 30.5 22.3 3.7 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor Soldering Requirements Supercapacitors are not to be exposed to reflowing soldering. Hand soldering At no time is the soldering iron to touch the capacitor body. Soldering iron temperature is to be limited to 360°C with an exposure time limited to 8 seconds Wave soldering The following table has the recommended wave soldering profiles for Lead free and tin/lead wave soldering processes. Wave soldering is only applicable for radial leaded version only. 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com DFC Flat Super capacitor 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com