Class X2 EMI/RFI Boxed Metallized

THB
Class X2 EMI/RFI Boxed
Metallized polypropylene film
capacitors for high humidity
environments
Features



Metallized polypropylene
Safety agency approved
Small size



Low self inductance
Low ESR
85% R.H. operating humidity range



Across the line
Antenna coupling
Power meters
Applications



EMI Filter
Line by pass
Outdoor applications
Specifications
Operating Temperature Range
Capacitance Tolerance
AC voltage
(50/60 Hz)
-40°C to +110°C
+10% at 1 kHz, 20°C
CSA
ENEC
CQC
UL
250/310 VAC
305 VAC
275 VAC
250/310 VAC
Tan δ
Dissipation Factor
at 1 kHz and 20°C
.1% Max
Capacitance
Insulation Resistance
@20°C (<70% RH)for 1 minute at
100VDC applied
Self Inductance
Dielectric Strength
Terminal to Terminal
Terminal to Case
>30000 MΩ at 100VDC
<0.33uF
15000 MΩ
>5000 MΩ at 500VDC
>30000 MΩ at 100VDC
>0.33uF
5000 MΩxuF
>5000 MΩ at 500VDC
<1 nano-Henry per mm of lead spacing and lead length
C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds
C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds
Terminal to Terminal
Cut-off current: 2A ac or 10mAdc
Current limiting resistance: 1Ω/V
Terminal to case
2050VDC applied between the terminals and case for 60 Seconds and 20°C
1000 Hours at 85% RH, 85°C and 240VAC applied.
Capacitance change
<10% of initially measured value
Dissipation Factor change
<1.0% at 1kHz
Insulation resistance change
>50% of initially specified value (T-T)
Humidity test
Capacitance temperature coefficient
Construction
Electrodes
Coating
Lead terminations
-200ppm/°C, +100ppm/°C
Metallized Polypropylene film
Vacuum deposited Metal layers
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
Lead free tinned copper leads
3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com
Class X2 metalized
polypropylene film
capacitors for high
humidity environments
Standard part listing
THB
LxHxT
(mm)
LxHxT
(mm)
(mm)
(mm)
(mm)
(mm)
0.047
473THB305KE
300
18x12x6
15
0.8
0.47
474THB305KH
120
31x18x9
27.5
0.8
0.068
683THB305KE
300
18x13x7
15
0.8
0.56
564THB305KG
180
26x20x10
22.5
0.8
0.1
104THB305KE
300
18x13.5x7.5
15
0.8
0.56
564THB305KH
120
31x20x10
27.5
0.8
0.15
154THB305KE
300
18x13.5x7.5
15
0.8
0.68
684THB305KG
180
26x20x11.5
22.5
0.8
0.15
154THB305KG
180
26x14.5x6
22.5
0.8
0.68
684THB305KH
120
31x20x10
27.5
0.8
0.22
224THB305KE
300
18x15x9
15
0.8
0.82
824THB305KG
180
26x22x12
22.5
0.8
0.22
224THB305KG
180
26x15x7.5
22.5
0.8
0.82
824THB305KH
120
31x21x11
27.5
0.8
0.8
0.33
334THB305KE
300
18x18x10
15
0.8
1
105THB305KG
120
26x24x13.5
22.5
0.33
334THB305KG
180
26x17x8
22.5
0.8
1
105THB305KH
120
31x22x13
27.5
0.8
0.47
474THB305KE
300
18x19x12.5
15
0.8
1.5
155THB305KH
120
31x24.5x15
27.5
0.8
0.47
474THB305KG
180
26x19x10
22.5
0.8
2.2
225THB305KH
120
31x28x18
27.5
0.8
All dimensions in (mm)
17mm Minimum lead length available upon request
Safety agency
UL
CSA
ENEC
(SEMKO)
CQC
X capacitors are used to suppress electrical noise by reducing the input
impedance of the device incorporating the capacitor.
X capacitors are connected across the supply line where failure of the
capacitor will not result in personal exposure to electrical shock.
X2 capacitors are to be used in applications where the peak voltage is
<1200V.
Standard
Voltage
Class
Certificate number
UL 1414(.0047 to 1uF)
250
FOWX2*
E317135
310
FOKY2^
FOKY8^
E317132
(.001 to 0.68uF)
250
Antenna coupling, Line
isolation, Across the line
(.0047 to 1.0 uF)
250
UL 1283 (.0047 to 2.2uF)
C22.2
class 2221 01
Class 2221 02 (.0047 to 10uF)
310
Antenna coupling, Line
isolation, Across the line,
Line to Ground
EMI
Class 2221 51 (.0047 to 1.0uF)
250
Audio/video equipment
EN-132400/IEC 60384-14/ SE/0252-2A
305
X2
GB/T14472-1998
275
241565
SE/07119
CQC07001021654
X2
CQC07001021577
*Antenna coupling, Line bypass, across the line
^Electromagnetic interference filter
3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com