+85°C Low Leakage Height Aluminum Electrolytic Capacitors RLS Features Low Leakage current Lead Free Leads Applications Alternative for Tantalums Timing circuits Filtering De-Coupling Specifications Operating Temperature Range Capacitance Tolerance WVDC Surge voltage SVDC WVDC Dissipation Factor tan δ 10 13 10 .2 16 20 16 .16 25 32 25 .14 10 3 6 16 2 4 25 2 4 Leakage current Low temperature stability Impedance ratio (120 Hz) Rated WVDC -25°C to +20°C -40°C to +20°C Load Life Capacitance change Dissipation factor Leakage current Shelf Life Capacitance change Dissipation factor Leakage current Cap Ripple Current Multipliers C<10 10<C<100 100<C<1000 C>1000 50 0.8 0.8 0.8 0.8 -40°C to +85°C +20% at 120 Hz, 20°C 35 50 44 63 35 50 .12 .1 2 Minutes .002CV or 3uA,Whichever is greater 35 50 2 2 3 3 2000 hours at 85°C with rated WVDC <20% of initial measured value <200% of maximum specified value >100% of maximum specified value 1000 hours at 85°C with no voltage applied <20% of initial measured value <200% of maximum specified value >100% of maximum specified value Frequency (Hz) 120 400 1k 1.0 1.3 1.45 1.0 1.23 1.36 1.0 1.16 1.25 1.0 1.11 1.17 10k 1.65 1.48 1.35 1.25 100k 1.7 1.53 1.38 1.28 D 5 6.3 8 S 2.0 2.5 3.5 d 0.5 0.5 0.6 D1=D+0.5mm D<8mm, L1=L+1mm D>8mm, L1=L+1.5mm S1=S+0.5mm Temperature (°C) 85 70 60 30 1.0 1.3 1.5 1.8 1.0 1.3 1.5 1.8 1.0 1.3 1.5 1.8 1.0 1.3 1.5 1.8 10 5.0 0.6 12.5 5.0 0.6 3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com