DFR0.5A~DFR0.5M Surface Mount Fast Recovery Rectifiers Major Ratings and Characteristics 0.5 A IF(AV) 50 V to 1000 V VRRM 15 A IFSM 5 μA IR 1.3V VF 150 °C Tj max. Features ● ● ● ● ● ● ● ● Low profile space Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date ● ● ● ● Case: JEDEC SOD-123FL molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Laser band denotes cathode end Weight: 0.017gram Maximum Ratings & Thermal Characteristics & Electrical Characteristics (TA = 25 °C unless otherwise noted) DFR- Symbol 0.5A 0.5B 0.5D 0.5G 0.5J 0.5K 0.5M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sinewave superimposed on rated load IFSM 15 A VF 1.3 V IR 5.0 50 μA Maximum instantaneous forward voltage at 0.5A Maximum DC reverse current at Rated DC blocking voltage TA = 25 ℃ TA = 100℃ Maximum reverse recovery time at IF = 0.5 A , IR = 1.0 A , Irr = 0.25 A trr Typical junction capacitance at 4.0 V ,1MHz CJ 15 pF TJ, TSTG –55 to +150 ℃ Operating junction and storage temperature range 150 - http://www.trr-jx.com - 250 500 nS DFR0.5A~DFR0.5M Surface Mount Fast Recovery Rectifiers Characteristic Curves (TA=25 ℃ unless otherwise noted) - http://www.trr-jx.com -