HD74LV1GT00A 2–input NAND Gate / CMOS Logic Level Shifter REJ03D0115-0900 Rev.9.00 Mar 21, 2008 Description The HD74LV1GT00A is high-speed CMOS two input NAND gate using silicon gate CMOS process. With CMOS low power dissipation, it provides high-speed equivalent to LS–TTL series. The internal circuit of three stages construction with buffer provides wide noise margin and stable output. The input protection circuitry on this device allows over voltage tolerance on the input, allowing the device to be used as a logic–level translator from 3.0 V CMOS Logic to 5.0 V CMOS Logic or from 1.8 V CMOS logic to 3.0 V CMOS Logic while operating at the high-voltage power supply. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • The basic gate function is lined up as Renesas uni logic series. • Supplied on emboss taping for high-speed automatic mounting. • TTL compatible input level. Supply voltage range : 3.0 to 5.5 V Operating temperature range : –40 to +85°C • Logic-level translate function 3.0 V CMOS logic → 5.0 V CMOS logic (@VCC = 5.0 V) 1.8 V or 2.5 V CMOS logic → 3.3 V CMOS logic (@VCC = 3.3 V) • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) • Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V) • All the logical input has hysteresis voltage for the slow transition. • Ordering Information Part Name Package Type HD74LV1GT00ACME CMPAK–5 pin HD74LV1GT00AVSE VSON–5 pin Note: Package Code (Previous Code) PTSP0005ZC-A (CMPAK-5V) PUSN0005KA-A (TNP-5DV) Please consult the sales office for the above package availability. REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 1 of 6 Package Abbreviation Taping Abbreviation (Quantity) CM E (3000 pcs/reel) VS E (3000 pcs/reel) HD74LV1GT00A Outline and Article Indication • HD74LV1GT00A Index band Marking T 1 = Control code CMPAK–5 • HD74LV1GT00A Marking T 1 = Control code VSON–5 Function Table Inputs A L L H H H : High level L : Low level REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 2 of 6 B L H L H Output Y H H H L HD74LV1GT00A Pin Arrangement IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y (Top view) Absolute Maximum Ratings Item Supply voltage range Symbol VCC Ratings –0.5 to 7.0 Unit V Input voltage range *1 VI V Output voltage range *1, 2 VO Input clamp current Output clamp current Continuous output current IIK IOK IO –0.5 to 7.0 –0.5 to VCC + 0.5 –0.5 to 7.0 –20 ±50 ±25 mA mA mA ICC or IGND ±50 mA PT 200 mW Tstg –65 to 150 °C Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Notes: V Test Conditions Output : H or L VCC : OFF VI < 0 VO < 0 or VO > VCC VO = 0 to VCC The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO IOL Output current IOH Input transition rise or fall rate ∆t / ∆v Operating free-air temperature Ta Note: Min 3.0 0 0 — — — Max 5.5 5.5 VCC 6 12 –6 — 0 0 –40 –12 100 20 85 Unused or floating inputs must be held high or low. REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 3 of 6 Unit V V V mA ns / V °C Conditions VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V HD74LV1GT00A Electrical Characteristic • Ta = –40 to 85°C Item Symbol VOH VCC (V) * 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.3 5.0 Min to Max 3.0 Min 1.5 2.0 — — — — VCC–0.1 2.48 Typ — — — — 0.10 0.15 — — Max — — 0.6 0.8 — — — — VOL 4.5 Min to Max 3.0 3.8 — — — — — — 0.1 0.44 Input current IIN 4.5 0 to 5.5 — — — — 0.55 ±1 µA Quiescent supply current ICC 5.5 — — 10 µA ∆ICC 5.5 — — 1.5 mA IOFF CIN 0 5.0 — — — 2.5 5 — µA pF VIH Input voltage VIL Hysteresis voltage VH Output voltage Output leakage current Input capacitance Note: Unit Test condition V VT+ – VT– V V IOH = –50 µA IOH = –6 mA IOH = –12 mA IOL = 50 µA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND VIN = VCC or GND, IO = 0 One input VIN = 3.4 V, other input VCC or GND VIN or VO = 0 to 5.5 V VIN = VCC or GND For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Switching Characteristics • VCC = 3.3 ± 0.3 V Item Symbol Propagation delay time tPLH tPHL Ta = 25°C Typ Max 7.0 10.0 7.5 12.0 Ta = –40 to 85°C Ta = 25°C Min Typ Max Ta = –40 to 85°C Min — — Min 1.0 1.0 Max 12.0 14.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF FROM (Input) TO (Output) A or B Y FROM (Input) TO (Output) A or B Y • VCC = 5.0 ± 0.5 V Item Symbol Propagation delay time tPLH tPHL — — 5.0 5.5 Min Max 6.9 7.9 1.0 1.0 8.0 9.0 Min Ta = 25°C Typ Max — 11.0 — Unit ns Test Conditions CL = 15 pF CL = 50 pF Operating Characteristics • CL = 50 pF Item Power dissipation capacitance Symbol VCC (V) CPD 5.0 REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 4 of 6 Unit pF Test Conditions f = 10 MHz HD74LV1GT00A Test Circuit VCC Output Input Pulse generator 50 Ω CL Note: CL includes probe and jig capacitance. Waveforms tr tf 90% Input VI 90% Vref Vref 10% 10% GND VOH 50% Output 50% VOL t PLH t PHL INPUTS VCC (V) VI 3.3±0.3 5.0±0.5 Vref tr / tf 2.5 V ≤ 3.0 ns 50% ≤ 3.0 ns 1.5 V 3V Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω. 2. The output are measured one at a time with one transition per measurement. REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 5 of 6 HD74LV1GT00A Package Dimensions JEITA Package Code RENESAS Code SC-88A Previous Code PTSP0005ZC-A MASS[Typ.] CMPAK-5 / CMPAK-5V D 0.006g A e Q c E HE LP L A A x M L1 S Reference Symbol A3 b A A A1 A2 A3 b b1 c c1 D E e e A2 A A1 y S S e1 HE L L1 LP x y b b1 l1 c1 c b2 A-A Section JEITA Package Code P-USON5-1.2x1.6-0.50 Pattern of terminal position areas RENESAS Code PUSN0005KA-A Previous Code TNP-5D/TNP-5DV Dimension in Millimeters Min 0.8 0 0.8 0.15 0.1 1.8 1.15 1.8 0.3 0.1 0.2 Nom 0.9 0.25 0.22 0.2 0.13 0.11 2.0 1.25 0.65 2.1 b2 e1 1.5 l1 Q 0.25 Max 1.1 0.1 1.0 0.3 0.15 2.2 1.35 2.4 0.7 0.5 0.6 0.05 0.05 0.35 0.9 MASS[Typ.] 0.002g D L1 1.0 ±0.1 4 ( 0.1 ) HE E ( 0.1 ) 5 1 3 A c e b REJ03D0115-0900 Rev.9.00, Mar 21, 2008 Page 6 of 6 Reference Dimension in Millimeters Symbol D E A A1 A2 b b1 e Lp x y ZD c c1 HE L1 Min Nom Max 1.55 1.6 1.65 1.1 1.2 1.3 0.6 0.15 0.2 0.3 0.5 0.07 0.12 0.22 1.55 1.6 0.2 1.65 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2