KBPC MB 35005W 3505W THRU KBPC MB 3510W 3510W DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 35 Amperes FEATURES * Metal case Maximum Heat Dissipation * Surge overload ratings-400 Amperes * Low forward voltage drop MB-25W TYP MECHANICAL DATA * * * * * * Case: Metal, electrically isolated Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: As marked Mounting position: Any Weight: 30 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) KBPC 35005W SYMBOL VRRM KBPC 3501W KBPC 3502W KBPC 3504W KBPC 3506W KBPC 3508W KBPC 3510W MB3505W MB351W MB352W MB354W MB356W MB358W MB3510W UNITS 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Rectified Output Current at Tc = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 17.5A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 oC 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Case per leg. Volts IO 35 Amps I FSM 400 Amps VF 1.1 Volts IR 10 500 2 I t 664 CJ 300 RθJ C 2.2 T J, T STG -55 to + 150 uAmps A 2 Sec pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES ( KBPC35005W MB3505W DC COMPONENTS CO., LTD. R THRU KBPC3510W MB3510W )