RL201G DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS RL207G TECHNICAL SPECIFICATIONS OF GLASS PASSIVATED RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * * * * * High reliability Low leakage Low forward voltage drop High current capability Glass passivated junction DO-15 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) RL206G RL207G UNITS Maximum Recurrent Peak Reverse Voltage SYMBOL VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IO RL201G RL202G RL203G RL204G RL205G 2.0 Amps I FSM 70 Amps Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle .375"(9.5mm) lead length at T L = 75oC VF 1.1 5.0 50 Volts Typical Junction Capacitance (Note) CJ 20 RθJ A TJ, TSTG 40 -65 to + 175 Typical Thermal Resistance Operating and Storage Temperature Range NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts IR 30 uAmps uAmps pF 0 C/ W 0 C RATING AND CHARACTERISTIC CURVES (RL201G THRU RL207G) DC COMPONENTS CO., LTD. R