HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL2 Series Pb Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • Reduced height at 2.5mm • High reliability & Low Cost • Tight stability & extended temperature • Proven resistance welded metal package RoHS/RoHS II 11.5 x 5.0 x 2.5 mm | | | | | | | | | | | | | | | APPLICATIONS: • Home electronics • Computers, modems, and communications • High-precision TCXO and clock applications • Microprocessors STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range Operation mode Operating Temperature Storage Temperature Frequency Tolerance Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance (R1) Shunt capacitance (C0) Load capacitance (CL) Drive Level Aging @ 25°C per year Insulation Resistance Typical Maximum Units Notes 3.579545 70 3.579545 24.0 24.01 70.00 24.01 50.00 0 -55 -50 +70 +125 +50 ºC ºC ppm See options -50 +50 ppm See options See table 1 below 7 18 100 1000 ±5 500 Drive Level Dependency (DLD, Minimum 7 points tested: from 1µW to 500µW) ±10 25% of Max ESR Max ESR in Table 1 MHz Ω pF pF µW ppm MΩ ppm Ω Ω Fundamental ATcut (Standard) 3rd OT AT-cut (Standard) Fundamental ATcut or BT-cut (See options) See options See options @ 100Vdc ± 15V Δfrequency (Max – Min) ΔESR (Max – Min) Max ESR over DLD range Table 1 Frequency (MHz) 3.579 - 4.999 (Fund.) 5.000 - 5.999 (Fund.) 6.000 - 7.999 (Fund.) 8.000 - 8.999 (Fund.) 9.000 - 9.999 (Fund.) 10.000 - 15.999 (Fund.) 16.000 - 50.000 (Fund.) 24.01 - 31.999 (3rd O/T) 32.000 - 70.00 (3rd O/T) ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED ESR(Ω) max. 180 120 100 80 60 50 40 100 80 Revised: 12.18.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL2 Series Pb RoHS/RoHS II 11.5 x 5.0 x 2.5 mm | | | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION: ABL2 - MHz- - - - - Packaging Blank: Bulk T: Tape & Reel TRAY: Tray Frequency in MHz Please specify the frequency in xx.xxxxMHz. e.g. 14.3181MHz Load Capacitance (pF) Please specify CL (Minimum 10pF) in pF or S for series I L2 QXX Q15 Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Blank: 0°C ~ +70°C A: -10°C ~ +60°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J*: -40°C ~ +105°C K*: -40°C ~ +125°C L*: -55°C ~ +125°C Value Added Insulator Tab Middle 3rd lead Trimmed leads for 0.15" length Oscillation Mode F: Fund. AT>24MHz FB***: Fund. BT>24MHz Freq. Tolerance Blank: ± 50 ppm H5: ± 5 ppm 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Freq. Stability Blank: ± 50 ppm U**: ± 10 ppm G: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm R: ± 150 ppm NOTE: * Frequency stability ±50ppm, ±100ppm, ±150ppm only. Contact ABRACON for tighter frequency stability. ** -10°C to +60°C only. *** Fundamental BT frequency stability ± 100ppm max at -10°C ~ +60°C only. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.18.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL2 Series Pb RoHS/RoHS II 11.5 x 5.0 x 2.5 mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS: ABL2 SERIES HC49/US (AT49) MICROPROCESSOR CRYSTAL 8.0 Date of Issue: Jan. 2nd, 2013 11.5 x 5.0 x 2.5 mm Page (8) of (10) Abracon Drawing # 450715 L 5.5mm Min 20.0 ± 0.5mm Packaging: Packaging Bulk Tape & Reel T= Tape and reel (1,000pcs/reel) Revision #: K Dimensions: inch (mm) TAPE & REEL: T= Tape and reel (1,000pcs/reel) Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.18.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com