CERAMIC SMD CRYSTAL CLOCK OSCILLATOR WITH VOLTAGE CONTROL ASPE SERIES FEATURES: • Complimentary PECL Outputs • Suitable for high density SMT., • Compact and low in height Reflow capable • Tri state function • Tight stability option • 2.5Vdc Supply Voltage Option 7.0 x 5.08 x 1.8mm | | | | | | | | | | | | | | | APPLICATIONS: • Telecommunications Equipment • High speed switching devices • Routing devices STANDARD SPECIFICATIONS: PARAMETERS Frequency Range Operating Temperature Storage Temperature Overall Frequency Stability Supply Voltage (Vdd) Input Current Symmetry Rise and Fall Time (Tr/Tf) Output Load Output Type Output Voltage Pullability Start-up Time Tristate Function Jitter (12KHz - 20MHz) 1.544 MHz to 700 MHz 0°C to + 70°C - 55°C to + 125°C ± 100 ppm max. 3.3 Vdc ± 5% 80mA (for Fo < 160MHz), 120mA (for Fo>160MHz) 40/60 % max. (see options) 400pS max 50 Ω PECL VOH = 2.35V Typ (3.3Vdd), 1.55V Typ (2.5Vdd) VOL = 1.6V Typ (3.3Vdd), 0.8V Typ (2.5Vdd) ± 70 ppm min. (see options) 10mS max "1" (VIH >= 0.7* Vdd) or open: Oscillation "0" (VIL < 0.3* Vdd) : No oscillation/Hi Z 3.5pS RMS max PIN 1 2 3 4 5 6 FUNCTION Voltage Control Tri-state GND/Case Output Output Vdd Note: Decoupling capacitor shall be connected between Vdd and GND for best performance and stability. OPTIONS AND PART IDENTIFICATION (Left blank if standard): OUTLINE DRAWING: ASPE - Supply Voltage - Frequency - Temperature - Frequency Stability Pullability - Symmetry - Packaging Supply Voltage options: V for 3.3V±5% 2 for 2.5V±5% Temperature options: D for -10°C to +60°C L for -40°C to +70°C Symmetry option: - S for 45/55% at 1/2Vdd Stability options: R for ± 25 ppm K for ± 30 ppm H for ± 35 ppm C for ± 50 ppm Pullability option: - N100 for ±100 ppm min Packaging option: T for Tape and Reel (1,000pcs/reel) Dimensions: inch (mm) ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO 9001:2008 ISO 9001 / QS 9000 CERTIFIED 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com