LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0645 Pb RoHS Compliant 6.0 x 6.0 x 4.5mm FEATURES: APPLICATIONS: • • • • • • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 4.5mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature & Humidity: Storage Temperature & Humidity: Part Number Inductance Units Symbol ASPI-0645-1R0 ASPI-0645-1R3 ASPI-0645-1R8 ASPI-0645-2R3 ASPI-0645-3R0 ASPI-0645-3R3 ASPI-0645-4R5 ASPI-0645-4R7 ASPI-0645-6R3 ASPI-0645-6R8 ASPI-0645-8R2 ASPI-0645-100 ASPI-0645-150 ASPI-0645-220 ASPI-0645-330 ASPI-0645-470 ASPI-0645-560 ASPI-0645-680 ASPI-0645-101 ASPI-0645-221 μH L 1.0 1.3 1.8 2.3 3.0 3.3 4.5 4.7 6.3 6.8 8.2 10 15 22 33 47 56 68 100 220 ASPI-0645 Series -25˚C to +120˚C (Including self generated heat) -10˚C to +40˚C, 30% to 70% RH Inductance Tolerance % M, N N N N N N N M M M M M M M M M M M M M M DCR mΩ DCR 10 11 12 13 17 17 23 23 26 34 36 45 62 95 136 195 230 300 430 900 DCR Tolerance % ±30% ±20% Saturation Current A Isat 10.00 8.60 7.20 6.40 6.00 5.10 4.80 4.70 3.90 3.80 3.20 3.10 2.50 2.10 1.70 1.40 1.20 1.10 0.90 0.55 Temperature Rise Current A Irms 6.50 6.00 5.30 5.00 4.80 4.50 3.80 3.70 3.60 3.50 3.10 3.00 2.50 2.10 1.70 1.40 1.20 1.10 0.90 0.50 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in HP 4338B milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (△L/Lo : ≤ -30%) 4. Irms : Based on temperature rise (△T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-0645- Inductance Code Please refer to the Electrical Spec Table Tolerance N: ±30%* M: ±20%* Packaging T1: Tape and Reel (1kpcs / reel) *N for L = 1.0 ~ 3.3µH *M for L = 4.5 ~ 220µH ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.16.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0645 Pb RoHS 6.0 x 6.0 x 4.5mm Compliant OUTLINE DRAWING: B C Max. D Typ. 6.0±0.2 6.0±0.2 4.5 1.50 3 : 1 A 2 4 Recommended Land Pattern Circuit Schematic No Polarity Dimension: mm Materials No 1 2 3 4 ABRACON IS ISO9001:2008 CE RTIFIED Part Name Ferrite core Terminals Coil Adhesive Magnetic Powder Material Ni-Zn Ferrite Ag/Ni/Sn Cu/P180 Grd 1 Silicon Base Resin Ni-Zn Ferrite Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.16.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0645 Pb RoHS 6.0 x 6.0 x 4.5mm Compliant REFLOW PROFILE: : TAPE & REEL: T1: 1,000pcs / reel Ao 6.40 Bo 6.40 Ko 4.70 W 16.00 P 12.00 T 0.40 A 330 B 21.0±0.8 C 13.5±0.5 G 16.6 N 99.5 T 21 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.16.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com