LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0315FS RoHS Pb Compliant 3.0 x 3.0 x 1.5mm FEATURES: APPLICATIONS: • • • • • • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 1.5mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: ASPI-0315FS Series -25˚C to +120˚C (Including self generated heat) -10˚C to +40˚C, 30% to 70% RH Abracon P/N: Operating Temperature & Humidity: Storage Temperature & Humidity: Part Number Inductance Units Symbol ASPI-0315FS-1R0 ASPI-0315FS-1R5 ASPI-0315FS-2R2 ASPI-0315FS-2R7 ASPI-0315FS-3R3 ASPI-0315FS-4R7 ASPI-0315FS-5R6 ASPI-0315FS-6R8 ASPI-0315FS-100 ASPI-0315FS-150 ASPI-0315FS-220 ASPI-0315FS-330 ASPI-0315FS-390 ASPI-0315FS-470 ASPI-0315FS-680 ASPI-0315FS-820 ASPI-0315FS-101 μH L 1.0 1.5 2.2 2.7 3.3 4.7 5.6 6.8 10 15 22 33 39 47 68 82 100 Inductance Tolerance % M, N N N M M M M M M M M M M M M M M M DCR Tolerance % DCR mΩ DCR 28 37 58 60 75 100 120 150 220 300 475 650 850 1100 1700 1900 2100 ±30% ±20% Saturation Current A Isat 2.3 2.1 1.62 1.5 1.35 1.20 1.00 0.97 0.8 0.65 0.55 0.45 0.4 0.35 0.3 0.27 0.25 Temperature Rise Current A Irms 2.3 2.1 2 1.95 1.8 1.6 1.4 1.3 1.1 1 0.8 0.7 0.5 0.45 0.35 0.32 0.3 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (△L/Lo : ≤ -30%) 4. Irms : Based on temperature rise (△T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-0315FSInductance Code Please refer to the Electrical Spec Table Tolerance N: ±30%* M: ±20%* Packaging T2: Tape and Reel (2kpcs / reel) *N for L = 1.0 ~ 1.5µH *M for L = 2.2 ~ 100µH ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0315FS Pb RoHS 3.0 x 3.0 x 1.5mm Compliant OUTLINE DRAWING: Mechanical Dimensions A B C Max. 3.0±0.1 3.0±0.1 1.5 Recommended Land Pattern Circuit Schematic No Polarity Dimension: mm Materials No 1 2 3 4 ABRACON IS ISO9001:2008 CE RTIFIED Part Name Drum core Terminals Coil Adhesive Magnetic powder Material Ni-Zn Ferrite Copper alloy, Sn Cu/UEW Epoxy base resin Ni-Zn Ferrite Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0315FS Pb RoHS Compliant 3.0 x 3.0 x 1.5mm TAPE & REEL: T2: 2,000pcs / reel A 3.15 B 3.15 K 1.55 F 4 T 0.25 Dimension: mm REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.22.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com