Surface Mount WLAN Antenna (2800MHz) AMCA31-2R800G-S1F-T Pb RoHS / RoHS II Compliant Moisture Sensitivity Level (MSL) – MSL = 1 FEATURES: • 2800MHz, Bandwidth ≥150MHz • Suitable for RoHS compliant reflow • Gain 0.5dBi (Peak) / -1dBi (Average) • VSWR <2:1 • Small size – 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) • Non Ground Mounting type. • Power Handling 3W Max • Matched to 50 Ohm. 3.2 x 1.6 x 1.2mm APPLICATIONS: • Wireless application - WiMax (2.800GHz) • User Equipments (UE), e.g. dongles, modems. • Alternative to larger PCB solution • Sunspot analysis STANDARD SPECIFICATIONS Maximum Ratings Item Operating Temperature Range Storage Temperature Range Value -40ºC to + 85ºC -10ºC ~ +40 and RH ºC 70% (Max.) Electrical Characteristics Item Spec Frequency 2800MHz Bandwidth ≥100 MHz Peak Gain 0.5 dBi typ. Average Gain -1 dBi typ VSWR <2:1 Impedance 50 Ohm Power Capability 3W max PART IDENTIFICATION: AMCA31-2R800G-S1F-T Packaging Blank: Bulk or Cut Tape T: T/R 1000pcs per reel T3 : T/R 3000pcs per reel ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.25.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Surface Mount WLAN Antenna (2800MHz) AMCA31-2R800G-S1F-T Pb RoHS / RoHS II Compliant 3.2 x 1.6 x 1.2mm OUTLINE DIMENSIONS: Recommended Land Pattern Series AMCA31 A 3.2±0.2 B 1.6±0.2 C 1.2±0.2 D 0.5±0.2 E 1.6±0.2 F 0.8±0.2 G 0.8±0.2 H 2.6±0.2 I 3.5±0.2 (Dimensions: mm) REFLOW PROFILE: • • • • • • Preheat condition: 150 ~200 /60~120ºC sec. Allowed time above 217ºC: 60~90sec. Max temp: 260ºC Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max [Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and process, and should not exceed the parameters as the Reflow profile shows.] MANUAL SOLDERING Pre-heating Temperature: 120ºC, 60ºC ~ 300 sec. • • • • • • • Iron soldering power: Max.30W. Pre-heating: 150 / 60 sec. ºC. Soldering Tip temperature: 350 Max. ºC. Soldering time: 3 sec Max. Solder paste: Sn/3.0Ag/0.5Cu. Max 1 times for iron soldering. Soldering Temperature: 340ºC±5ºC, 5sec max per each terminal. [Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.] ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.25.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Surface Mount WLAN Antenna (2800MHz) AMCA31-2R800G-S1F-T Pb RoHS / RoHS II Compliant 3.2 x 1.6 x 1.2mm TAPE & REEL: Packaging: 1000 or 3000 Units per reel, please specify when ordering. 1000pcs MOQ. Reel Dimensions W P1 E F B0 8.0±0.10 4.0±0.10 1.75±0.10 3.50±0.15 3.50±0.10 D0 P0 K0 A0 t 1.50 +0.10 / -0.0 4.0±0.10 1.50±0.10 1.80±0.10 0.22±0.10 Mounting Direction of Tape on Reel Note: The sprocket holes are to the right as the tape is pulled toward the user. (Dimensions: mm) ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.25.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com