SMD Multilayer Chip Inductor for Choke ASMCI-0805 Pb RoHS Compliant 2.0 x 1.25 x 0.85mm /2.0 x 1.25 x 1.25mm APPLICATIONS: FEATURES: • Monolithic structure designed for high reliability • Excellent solderability and heat resistance • Magnetic shield designed to eliminate cross coupling • High DC current and low DCR Choke circuits in DC power line for PC, mobile phones, digital cameras, camcorder, and music players. ELECTRICAL SPECIFICATIONS: Operating Temperature: -40˚C to +85˚C Storage Temperature: -10˚C to +40˚C, 70% RH max Part Number ASMCI-0805Inductance Code Units Inductance Tolerance DCR SRF Min. Max. Rated Current μH % M=±20%, N=±30% M, N M, N M, N M, N M, N M, N M, N Ω ± 30% MHz mA DCR SRF Ir 0.07 0.13 0.18 0.20 0.28 0.30 0.50 235 170 125 75 50 25 15 1000 800 550 300 220 180 60 Symbol L ASMCI-0805-R10 ASMCI-0805-R22 ASMCI-0805-R47 ASMCI-0805-1R0 ASMCI-0805-2R2 ASMCI-0805-4R7 ASMCI-0805-100 0.1 0.22 0.47 1.0 2.2 4.7 10 Tape and Reel Qty 4k 4k 4k 4k 4k 4k 3k Test Conditions a. Ambient Temperature: 20± 15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa Inductance (L): High Accuracy RF Impedance/Material Analyzer-HP4291B+HP16192A or Equivalent, 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): High Accuracy Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): High Accuracy RF Impedance/Material Analyzer HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Rated current (Ir): HP6632B system DC power supply, HP4291B+HP16192A+HP16200A or equivalent. Definition of Rated Current (Ir): Ir is the value of DC current as inductance L (μH) decreased just 50% against initial value. ABRACON IS ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.08.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD Multilayer Chip Inductor for Choke ASMCI-0805 2.0 x 1.25 x 0.85mm /2.0 x 1.25 x 1.25mm RoHS Pb Compliant PART IDENTIFICATIONS: ASMCI-0805 - - Tolerance M: ±20% N: ±30% Inductance Code Please refer to the table above Packaging T: Tape and Reel (4kpcs / reel for 0.1~4.7µH; 3kpcs / reel for 10µH) OUTLINE DRAWING: L W T a 2.0 (+0.3, -0.1) [0.079 (+0.012, -0.004)] 1.25±0.2 [0.049±0.008] 0.85±0.2[0.033±0.008] for 0.1~4.7µH 0.5±0.3 [0.020±0.012] 1.25±0.2[0.049±0.008] for 10µH A B C 0.80~1.20 0.80~1.20 0.90~1.60 Dimension: mm [inch] Dimension: mm MATERIALS: Side View Top View 1 ABRACON IS ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED CERTIFIED 2 3 4 1 2 3 Part Name Base Material Internal Conductor Pull out Electrode 4 Terminal Electrode Material Ferrite Ag Ag Ag (Inner layer) Ni-Sn (Outer layer) Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.08.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD Multilayer Chip Inductor for Choke ASMCI-0805 Pb 2.0 x 1.25 x 0.85mm /2.0 x 1.25 x 1.25mm RoHS Compliant REFLOW PROFILE: Δ Δ Δ Δ Δ Δ Preheat condition: 150 ~200˚C /60~120sec. Allowed time above 217˚C: 60~90sec. Max temp: 260˚C Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max TAPE & REEL: T: 4,000pcs / reel for 0.1~4.7µH; 3,000pcs / reel for 10µH A B P T(max) 1.5±0.2 2.3±0.2 4.0±0.1 1.1 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.08.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com