IL6965

TECHNI CAL DATA
IL6965
Telephone Speech Network
with Dialler Interface
The IL6965 is a bipolar integrated circuit for use in electronic
telephones.
The IL6965 has low operating voltage, it provides an excellent branch
performance.
It has line voltage increasing circuit by the external terminal.
Transmitting and receiving gains automatically vary according to the
line current.
IL6965N
Plastic DIP
IL6965D/DW Plastic SOIC
ORDERING INFORMATION
Device
Operating
Temperature Range
Package
Packing
IL6965N
IL6965D
IL6965DT
TA = -30° to 70° C
DIP20
SOP20
SOP20
Tube
Tube
Tape & Reel
PIN ASSIGNMENT
FEATURES
• Externally adjustable transmitting, receiving and sidetone gains.
• Switching between transmitting output and DTMF output is
possible.
• Direct interface with light and compact ceramic transmitterreceiver is possible.
• Receiver follow impedance type can also be used.
• Gain is automatically controlled according to the line current.
(Auto-PAD function)
• The line voltage can be increased by the external terminal (Up
function).
• PKG is 20pin DIP & SOP
2011, March, Rev. 01
I L 6965
BLOCK DIAGRAM
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
IL6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
2011, March, Rev. 01
I L 6965
N SUFFIX PLASTIC DIP
(MS - 001AD)
A
Dimension, mm
11
20
B
1
10
Symbol
MIN
MAX
A
24.89
26.92
B
6.10
7.11
C
F
L
C
-T-
SEATING
PLANE
5.33
D
0.36
0.56
F
1.14
1.78
G
2.54
H
7.62
N
K
G
M
J
H
D
0.25 (0.010) M T
NOTES:
1. Dimensions “A”, “B” do not include mold flash or protrusions.
Maximum mold flash or protrusions 0.25 mm (0.010) per side.
J
0°
10°
K
2.92
3.81
L
7.62
8.26
M
0.20
0.36
N
0.38
D SUFFIX SOIC
(MS - 013AC)
A
20
11
H
Dimension, mm
B
1
P
10
G
R x 45
C
-TK
D
SEATING
PLANE
0.25 (0.010) M T C M
NOTES:
1. Dimensions A and B do not include mold flash or protrusion.
2. Maximum mold flash or protrusion 0.15 mm (0.006) per side
for A; for B ‑ 0.25 mm (0.010) per side.
J
F
M
Symbol
MIN
MAX
A
12.60
13.00
B
7.40
7.60
C
2.35
2.65
D
0.33
0.51
F
0.40
1.27
G
1.27
H
9.53
J
0°
8°
K
0.10
0.30
M
0.23
0.32
P
10.00
10.65
R
0.25
0.75
2011, March, Rev. 01