RoHS Compliant 2.56:1 Impedance Ratio Center Tapped Transformer 5-65 MHz Features • • • • • • MABA-007902-CF38A0 V1P Schematic Surface Mount 2.56:1 Impedance 260°C Reflow Compatible RoHS* Compliant RoHS version of MABAES0017 Available on Tape and Reel. Reel quantity 2000 Description M/A-COM’s MABA-007902-CF38A0 is a 2.56:1 RF flux coupled step up transformer in a low cost, surface mount package. Ideally suited for high volume CATV/Broadband applications. Case Style: SM-138 Pin Configuration Pin No. Function 1 Secondary Dot 2 Centre Tap 3 Secondary 4 Primary 5 Primary Dot Dimensions in mm [inches] Tolerance: .xx ± .02, .xxx ± .010 Ordering Information Part Number Package MABA-007902-CF38A0 2000 piece reel MABA-007902-CF38TB Customer Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. RoHS Compliant 2.56:1 Impedance Ratio Center Tapped Transformer 5-65 MHz MABA-007902-CF38A0 V1P Electrical Specifications: TA = 25°C, Z0 = 75Ω Parameter Test Conditions Units Min Typ Max Insertion Loss 5 - 65 MHz dB - 0.8 1.0 Amplitude Unbalance (Nominal 0dB) 5 - 65 MHz dB - ±0.02 ±0.1 Phase Unbalance (Nominal 180º) 5 - 65 MHz º - ±0.2 ±1.0 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 250mW DC current 30mA Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. RoHS Compliant 2.56:1 Impedance Ratio Center Tapped Transformer 5-65 MHz MABA-007902-CF38A0 V1P Typical Performance Curves: TA = 25°C, Z0 = 75Ω Insertion Loss 1 (pin 5 to pin 3) Insertion Loss 2 (pin 5 to pin 1) 0.0 - 0.2 - 0.2 - 0.4 - 0.4 dB dB 0.0 - 0.6 - 0.6 - 0.8 - 0.8 - 1. 0 - 1. 0 5 5 17 29 41 53 17 29 41 53 65 65 Frequency (MHz) Frequency (MHz) Phase Balance Amplitude Unbalance 185 0 . 10 183 Degrees dB 0.05 0.00 181 179 177 - 0.05 175 - 0 . 10 5 5 17 29 41 53 17 29 41 53 65 65 Frequency (MHz) Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.