A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success The Best Partner for your Success Constant Currnet Linear LED Driver Driver IC Guide Note for LED Lighting Pin to Pin Compatibility IK402U BCR402 KCR402T Constant Currnet Linear LED Driver SOT23-6 IL9910N/D/DH HV9910 Universal High-Voltage LED Driver DIP-8/SOP-8 SOP-16 IL9961N/D/DH HV9961 LED Driver with Average-Mode Constant Current Control DIP-8/SOP-8 SOP-16 60mA High-Voltage LED Driver with Build-in MOSFET Switch Package IK2306PT OWN IL9921/22/23 HV9921/22/23 IK2802D MBI1802 High-Power Constant-Current LED Driver (2-Ch) IK2804D MBI1804 High-Power Constant-Current LED Driver (4-Ch) SOP-8 IK2816TSD MBI1816 High-Power Constant-Current LED Driver (16-Ch) TSSOP-20 IK2312ET (IL33120ET) OWN High-Voltage LED Driver with Build-in MOSFET Switch 120mA High-Voltage LED Driver with Build-in MOSFET Switch And Average-Mode Constant Current Control (Under Development) SOT-89 SOT-89/TO-92 SOP-8 SOT-223 ☞ For more information about LED Lighting driver IC, please refer to the Homepage. NEW IK402U IK402U is a high-stable current source IC designed to be used as a constant current LED driver. Application of a constant current source provides continuous brightness of LED light and long LED life time. Moreover, a constant current source provides an over-temperature protection to LED. FEATURES Part Function CRD (Current Regulating Device) APPLICATION ► High-stability output current ► Channel letters for advertising, LED strips for ► Low dropout voltage decorative lighting ► Easy adjustable output current ► Aircraft, train, ship illumination ► Negative thermal coefficient of output current ► Retrofits for general lighting, white goods like ► Small overall dimensions, possible chip refrigerator lighting, Medical lighting mount in a single package with LED ► Automotive applications like CHMSL and rear ► Low cost, no external elements, simple use combination lights ► LED drive current of 22mA ► Output current adjustable up to 65mA with external resistor ► Supply voltage up to 42V ► Easy paralleling of drivers to increase current ► Low voltage overhead of 1.2V ► High current accuracy at supply voltage variation ► No EMI ► ESD Rating: Human Body Model 2KV ► Reduced output current at higher temperatures (-) negative thermal coefficient of - 0.1 % / K Part NO. Package IK402U SOT23-6L (SC74) Current Maximum PD (mW) Range (mA) Voltage (V) 22~65 40 300 Compatibility Device BCR402U (Infineon) KCR402T (KEC) SOT23-6L (SC74) (2.9 x 1.6 x 1.1)mm www.iksemi.com 1/10 www.iksemi.com Boost mode 2/10 A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success IL9910 Universal High-Voltage LED Driver The IL9910 is a PWM high-efficient LED driver specifically designed for driving multi-LED strings or arrays, supplied from voltage sources rating from 8VDC up to 450VDC. IC controls an external MOSFET at fixed switching frequency up to 300 kHz. The operating frequency can be set using an external resistor. FEATURES ► 8 V to 450 V input range ► LED string current can be set from a few mA to more than 1 A ► Brightness control for LED string from one to hundreds of diodes ► PWM low-frequency LED dimming ► Functional Analogue of HV9910 (Supertex) ► Linear LED dimming ► Operating temperature range -40℃~+85℃ APPLICATION ► DC/DC or AC/DC LED Driver applications ► Low-cost off-line buck, boost or buck-boost converter control IC ► RGB Backlighting LED Driver ► Back Lighting of Flat Panel Displays ► General purpose constant current source ► Signage and Decorative LED Lighting ► Automotive ► Chargers Functional Block Diagram DIP-8 N-suffix Device Typical Application Circiut IL9910AD IL9910AN IL9910ADH IL9910BD IL9910BN IL9910BDH IL9910CD IL9910CN IL9910CDH Vcs SOP-8 D-suffix SOP-16 DH-suffix Operating Temperature Range (Ta) Package - 40 ~ +85℃ SOP-8 DIP-8 SOP-16 SOP-8 DIP-8 SOP-16 SOP-8 DIP-8 SOP-16 225~242mV 242~257mV 257~275mV The Best Partner for your Success LED Driver with Average-Mode Constant Current Control IL9961 The IL9961 is an average current mode control LED driver IC operating in a constant off-time mode. this control IC does not produce a peak-to-average error, and therefore greatly improves accuracy, line and load regulation of the LED current without any need for loop compensation or high-side current sensing. The output LED current accuracy is ±3%. The IC is equipped with a current limit comparator for hiccupmode output short circuit protection. The IL9961 can be powered from an 8.0~450V supply. A PWM dimming input is provided that accepts an external control TTL compatible signal. The output current can be programmed by an internal 275mV reference, or controlled externally through a 0~1.5V dimming input. IL9961 is pin-to-pin compatible with IL9910 and it can be used as a drop-in replacement for many applications to improve the LED current accuracy and regulation. FEATURES APPLICATION ► Input Voltage range VIN from 8 V to 450 V ► Control by Fast average current ► Programmed fixed duration of the current off state in the induction coil ► Linear LED dimming ► Option of LED brightness trimming by low frequency PWM signal ► Output short circuit protection ► IL9910 IC pin-to-pin compatibility ► Functional Analogue of HV9961 (Supertex) ► Operating temperature range -40℃~+125℃ DIP-8 N-suffix SOP-8 D-suffix ► DC/DC or AC/DC LED Driver applications ► LED backlight driver for LCD displays ► General purpose constant current source ► LED panels and screens ► Architectural and decorative LED lighting ► LED street lighting Functional Block Diagram SOP-16 DH-suffix Typical Application Circiut www.iksemi.com 3/10 www.iksemi.com 4/10 A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success High-Voltage LED Driver with Build-in MOSFET Switch Compatibility and Functional Differences Between the IL9961 and IL9910 LED Drivers Feature IL9910 IL9961 Fixed-Frequency Mode Resistor from RT to GND N/A Fixed Off-Time Mode Resistor from RT to GATE Current Threshold Currnet Threshold Accuracy 250mV or VLD (peak) 10% LED Current Accuracy Depends on inductance and Switching frequency variation LED Current Regulation Poor. LED current depends on Input and output voltage LD (Linear attenuation) 0~250mV Input Range Residual LED Current VLD=GND 5% (typ.) of ILED @ VLD=250mV Current Limit Threshold None Hiccup Time N/A Minimum On-Time 465ns Maximum Duty Cycle 0.5 (fixed freq.), 0.8 (fixed TOFF) The Best Partner for your Success Resistor from RT to GND (Value adjustment needed For conversion from IL9910) 272mV or VLD/5.5 (average) Auto-Zero Independent of inductance and switching frequency variation Good 0.2V (0.15V)~1.5V 0A 440mV 400us 1000ns 0.75 IK2306PT IK2306 is high-voltage LED driver control ICs with build-in MOSFET switch and purposed for LED lighting control. IC allows efficient operation of LED strings from voltage sources ranging up to 400 VDC. The IK2306 include an internal high-voltage switching MOSFET controlled with fixed off-time TOFF of approximately 10μs. The LED string is driven at constant current, thus providing constant light output and enhanced reliability. The output current is internally fixed 50mA for IK2306. The peak current control scheme provides good regulation of the output current throughout the universal AC line voltage range of 85 to 264VAC or DC input voltage of 20 to 400V. FEATURES ► ON-resistance of the MOSFET switch 210 Ohm for ambient temperature 25 ºС ► OFF-state breakdown voltage of the MOSFET switch not less 500 V for ambient temperature 25 ºC ► Operating temperature range -40℃~+85℃ ► Own Design item Functional Block Diagram APPLICATION ► Decorative Lighting ► Low Power Light Fixtures ► LED Signs and Displays ► Architectural Lighting ► Incandescent Replacements ► Industrial Lighting SOT-89 PT-suffix Typical Application Circiut of IL9910 and IL9961 Typical Application Circiut www.iksemi.com 5/10 www.iksemi.com 6/10 A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success High-Voltage LED Driver with Build-in MOSFET Switch IL9921/22/23 The IL9921, IL9922, and IL9923 are pulse width modulated (PWM) LED driver control ICs. They allow efficient operation of low current LED strings from voltage sources ranging up to 400VDC. They include an internal high-voltage switching MOSFET controlled with fixed off-time TOFF of approximately 10ms, which allow driving of LED voltage strings of up to 80% of the input voltage. The LED string is driven at constant current, providing constant light output and enhanced reliability. The output current is internally fixed at 20mA for the IL9921, 50mA for the IL9922, and 30mA for IL9923. The peak current control scheme of the IL9921, IL9922, and IL9923 provide good LED current regulation throughout the universal AC input voltage range of 85 to 264VAC or DC input voltage of 20 to 400V. Features Internal MOSFET 3 Pins, TO-92 or SOT-89 DC input range : 20~400VDC Fixed off-time control 500V Breakdown voltage Benefits Low external part count Low cost and small board area Universal off-line applications of 80~264VAC, or low voltage architectural lighting. No compensation circuit needed. Simple control of buck converter. String LEDs up to 80% of input voltage Meet input transient requirements such as EN61000 Series FEATURES ► ON-resistance of the MOSFET switch 210 Ohm for ambient temperature 25 ºС ► OFF-state breakdown voltage of the MOSFET switch not less 500 V for Ambient temperature 25 ºC ► Operating temperature range -40℃~+85℃ ► Pin to Pin compatibility HV9921/22/23 (Supertex) Typical Application Circiut APPLICATION ► Decorative Lighting ► Low Power Light Fixtures ► LED Signs and Displays SOT-89 ► Architectural Lighting PT-suffix ► Incandescent Replacements ► Industrial Lighting TO-92 LF-suffix Functional Block Diagram The Best Partner for your Success High-Power Constant-Current LED Driver IK2802D/04D/16TSD IK2802D/IK2804D/IK2816TSD is an instant On/Off LED driver for high power LED applications and exploits to enhance its output characteristics. At IK2802D/IK2804D/IK2816TSD output stage, (Two/Four/Sixteen) regulated current ports are designed to provide uniform and constant current sinks for driving LEDs within a large range of VF variations. IK2802D/IK2804D/IK2816TSD provides users (2-Ch/4-Ch/16-Ch) constant current ports. Users may adjust the output current from (40~360mA/40~240mA /5~60mA) through an external resistor, Rext, which gives users flexibility in controlling the light intensity of LEDs. In addition, users can precisely adjust LED brightness from 0% to 100% via output enable with Pulse Width Modulation. Additionally, to ensure the system reliability, IK2802D/IK2804D/IK2816TSD is built with TP (Thermal Protection) function and thermal pad. The TP function protects IC from over temperature (165°C). Also, the thermal pad enhances the power dissipation. As a result, a large amount of current can be handled safely in one package FEATURES ► Constant output current invariant to load voltage change ► Output current adjusted through an external resistor ► All Load Supply Voltage drift about 17V (Max) ► Schmitt trigger input ► 5V supply voltage ► Buit-in Thermal Protection ► Pin to Pin compatibility MBI1802/03/16 (Macroblock) Characteristic Constant-Current Output Channels Maximum output constant current per channel Between Channels (Max) Excellent output current accuracy Between Ics (Max) Thermal protection Package type APPLICATION Application IK2802D IK2804D IK2816TSD Automotive interior lighting ● ● ● ● Channel letter ● Decoration lighting ● High-Flux LED lighting ● LCD Backlight ● Photocopier ● Scanner ● SOP-8 D-suffix IK2802D 2 360mA <±3% <±6% Yes SOP-8 IK2804D 4 240mA <±3% <±6% Yes SOP-8 TSSOP-20 TSD-suffix IK2816TSD 16 60mA <±3% <±6% Yes TSSOP-20 Functional Block Diagram 3-Pin Switch-Mode LED Lamp Driver ICs www.iksemi.com 7/10 www.iksemi.com 8/10 A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success (Under Development) The Best Partner for your Success High-Voltage LED Driver with Build-in MOSFET Switch And Average-Mode Constant Current Control Application Circiut IK2312ET (IL33120ET) The IK2312ET is a pulse width modulated (PWM) LED driver control IC. It allows efficient operation of low current LED strings from voltage sources ranging up to 400VDC. The IK2312ET include an internal high-voltage switching MOSFET controlled with fixed off-time TOFF of approximately 10μs. The LED string is driven at constant current, providing constant light output and enhanced reliability. The IK2312ET does not produce a peak-to-average error, and therefore greatly improves accuracy of the LED current. The IK2312ET designed for using low inductance value. The average current control scheme of the IK2312ET provide good LED current regulation throughout the universal AC input voltage range of 85 to 264 VAC or DC input voltage of 20 to 400V. APPLICATION FEATURES ► Integrated 400V 40Ohm MOSFET Switch ► Single resistor LED current setting ► 5% accurate LED current ► Output short circuit protection with skip mode ► Over-temperature protection ► Own Design item ► Decorative Lighting ► Low Power Light Fixtures ► LED Signs and Displays ► Architectural Lighting ► Industrial Lighting Functional Block Diagram SOT-223 ET-suffix Typical Application Circiut www.iksemi.com 9/10 www.iksemi.com 10/10 A New Era Semiconductor Company A New Era Semiconductor Company The Best Partner for your Success The Best Partner for your Success ▶ Hong Kong Branch Office Workshop E4, 9F., Wah Lok Industrial Centre Nos.31-35 Shan Mei Street, Shatin, Fotan, N.T., Hong Kong TEL : 852-3142-9790 Sales : [email protected] ▶ India Branch Office Flat No.503, Bldg No.9, Shanthi Park Appts, 9th Block, Jayanagar, Bangalore 560069, India TEL : 91998-0185734 Sales : [email protected] & [email protected] Sales Agency & Distributors ▶ SEUNG JUN Co., Ltd. 151-7, Chonggyecheon-ro, Jongno-gu, Seoul, 110-430 S. Korea TEL : 82-2-2274-6801 FAX : 82-2-2268-5696, 82-2-2274-5929 Sales : [email protected] ▶ ESKOR Co., Ltd. (Seoul Office) A-802, Chung-Ang Industry Distribution (Circulation) Complex, 15, Gyeongin-ro, 53-gil, Guro-gu, Seoul 152-721 S. Korea TEL : 82-2-2266-7805 FAX : 82-2-2264-7803 Sales : [email protected] ▶ Head Office / R&D Lab. Rm. 503, DMC Hi-Tech Industrial Center, 330 SeongAm-Ro, Mapo-gu Seoul 121-912 S. Korea TEL : 82-2-3153-7090~4 FAX : 82-2-3153-7095 Korea Sales : [email protected] Oversea Sales : [email protected] ▶ Sales Office (Guro) Ra-4721, Chung-Ang Industry Distribution (Circulation) Complex, 15, Gyeongin-ro, 53-gil, Guro-gu, Seoul 152-721 S. Korea TEL : 82-2-2613-1630 FAX : 82-2-2613-1707 Slaes Office : [email protected] (Busan Head Office) 3F 19, Jeonpo-daero 223 beon-gil, Busanjin-gu, Busan, 614-740 S.Korea (Jeonpo-dong, Technoplaza A dong) TEL : 82-51-806-7805 FAX : 82-51-806-7803 Sales : [email protected] ▶ ASTEL Co., Ltd. E-302 (Pangyo Innovally) 255, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 S. Korea TEL : 82-31-8108-7456 FAX : 82-31-707-7694 Sales : [email protected]