TEST ACCESSORIES RF and microwave test accessories from JFW are manufactured to the highest quality standards with the specifications of each customer in mind. Our catalog list of devices includes bias taps/tees, DC blocks, impedance matching pads, impedance matching transformers, feedthru terminations, RF detectors, RF fuse holders and DC cable assemblies. Available Features ● Rugged construction ● Quality RF performance ● Any RF connector combination (BNC, SMA, N, TNC, 7/16, F, reverse polarity and more) ● Custom designs available AFFORDABLE CUSTOM DESIGNS ARE ALSO AVAILABLE! Call 317-887-1340 • Toll Free 877-887-4539 • Fax 317-881-6790 E-mail [email protected] • www.jfwindustries.com 8-1 Test Accessories Model Number Index Please add connector type to the end of part number to complete model number (Example: 50DB-009 SMA). Bias Taps - 50 Ohm Model Number Frequency Range Page 50BT-014 50BT-017 50BT-029 800-2500 MHz 100-1750 MHz 250-3000 MHz 8-8 8-8 8-8 75BT-007 100-1750 MHz 8-8 75BT-013 5-2150 MHz 8-8 Bias Taps - 75 Ohm DC Blocks - 50 Ohm Model Number 50DB-002 50DB-007 Frequency Range 50 KHz - 1800 MHz 10 MHz - 18 GHz Page 8-3 8-3 50DB-009 10-4000 MHz 50DB-011 50DB-039 75DB-001 75DB-013 Feedthru Terminations - 50 Ohm Impedance Page 50 Ohms 8-9 50L-026 DC-1000 MHz 50 Ohms 8-9 Feedthru Terminations - 75 Ohm Model Number 75L-001 Frequency Range DC-500 MHz Impedance Page 75 Ohms 8-9 75L-004 DC-1000 MHz 75 Ohms 8-9 Impedance Matching Pads Frequency Range Page 8-3 57Z DC-1000 MHz 8-4 10 MHz - 18 GHz 8-3 75Z DC-1000 MHz 8-4 200 KHz - 2000 MHz 8-3 57Z-2G DC-2000 MHz 8-4 75Z-2G DC-2000 MHz 8-4 57Z-3G DC-3000 MHz 8-4 75Z-3G DC-3000 MHz 8-4 1-2500 MHz 0.1-3000 MHz 8-3 8-3 DC Cables Model Number Description Page 016-168-XX 10 Pin Ribbon 8-11 016-306-XX 10 Pin Ribbon 8-11 016-330-XX 4 Pin Molex 8-11 016-551-XX 016-552-XX D-Subminiature 9 Pin D-Subminiature 9 Pin 8-11 8-11 016-554-XX 4 Pin Molex RF Detectors - 50 Ohm Frequency Range 1-1000 MHz 1-2000 MHz 1-3000 MHz RF Detectors - 75 Ohm Impedance Matching Transformers Model Number Frequency Range Page 57ZT 75ZT 57ZT-1G 75ZT-1G 0.5-600 MHz 0.5-600 MHz 0.5-1000 MHz 0.5-1000 MHz 8-5 8-5 8-5 8-5 8-11 57ZTT-AA 800-2200 MHz 8-5 75ZTT-AA 800-2200 MHz 8-5 Page 8-6 8-6 8-6 Model Number 50RF-037 50RF-038 75D-009 1-1000 MHz 8-7 75D-010 1-2200 MHz 8-7 S-6-F 06-07-13 Cat Sep 2011 Frequency Range DC-1000 MHz Model Number DC Blocks - 75 Ohm Model Number 50D-050 50D-051 50D-052 Model Number 50L-001 8-2 RF Fuse Holders - 50 Ohm Frequency Range DC-1000 MHz Impedance Page 50 Ohms 8-10 DC-1000 MHz 50 Ohms 8-10 DC Blocks (Inner only) Model Frequency Range Impedance Insertion Loss (maximum) VSWR (maximum) Breakdown Voltage RF Input Power (average) RF Connector 50DB-002 50 KHz - 1800 MHz 50 Ohms 0.5 dB 1.3:1 100 Volts 2 Watts BNC, N or TNC 50DB-007 10 MHz - 18 GHz 50 Ohms 0.5 dB 1.35:1 200 Volts 2 Watts SMA 50DB-009 10 - 4000 MHz 50 Ohms 0.3 dB 1.3:1 50 Volts 2 Watts BNC, N, SMA or TNC 50DB-011 10 MHz - 18 GHz 50 Ohms 0.6 dB 1.35:1 200 Volts 2 Watts N 50DB-039 200 KHz - 2000 MHz 50 Ohms 0.4 dB 1.2:1 50 Volts 2 Watts SMA 1.1:1 1-500 MHz 1.25:1 500-1000 MHz 1.35:1 1000-2000 MHz 1.4:1 2000-2500 MHz 100 Volts 2 Watts BNC, N or TNC 1.3:1 0.1-2000 MHz 1.4:1 2000-3000 MHz 50 Volts 2 Watts BNC, F or N 75DB-001 1-2500 MHz 75 Ohms 0.2 dB 1-1000 MHz 0.3 dB 1000-2500 MHz 75DB-013 0.1-3000 MHz 75 Ohms 0.5 dB 0.1-2000 MHz 0.7 dB 2000-3000 MHz 50DB-002 / 75DB-001 50DB-007 50DB-009 50DB-011 50DB-039 75DB-013 Custom RF designs at catalog prices | No NRE charges | Email [email protected] 8-3 Impedance Matching Pads Model Frequency Range Impedance* Attenuation Loss VSWR (maximum) 57Z DC-1000 MHz 50 Ohms male 75 Ohms female 5.7 ± 0.5 dB 1.2:1 75Z DC-1000 MHz 75 Ohms male 50 Ohms female 5.7 ± 0.5 dB 1.2:1 57Z-2G DC-2000 MHz 50 Ohms male 75 Ohms female 5.7 ± 0.5 dB 1.2:1 DC-1000 MHz 1.3:1 1000-2000 MHz 75Z-2G DC-2000 MHz 75 Ohms male 50 Ohms female 5.7 ± 0.5 dB 1.2:1 DC-1000 MHz 1.3:1 1000-2000 MHz 57Z-3G DC-3000 MHz 50 Ohms male 75 Ohms female 5.7 ± 0.3 dB DC-1500 MHz 5.7 ± 0.5 dB 1500-3000 MHz 1.2:1 DC-1500 MHz 1.35:1 1500-3000 MHz 75Z-3G DC-3000 MHz 75 Ohms male 50 Ohms female 5.7 ± 0.3 dB DC-1500 MHz 5.7 ± 0.5 dB 1500-3000 MHz 1.2:1 DC-1500 MHz 1.35:1 1500-3000 MHz * OTHER IMPEDANCES AVAILABLE - PLEASE CONTACT THE FACTORY Common Specifications Input Power 1 Watt average 1000 Watts peak Operating Temperature RF Connectors - 50 Ohm Side RF Connectors - 75 Ohm Side -20° C to +85° C BNC, TNC, N or SMA BNC, F, N or TNC 57Z-2G / 75Z-2G BNC 57Z / 75Z BNC BU www Y ONLI N .jfwin dust E AT ries. com 57Z-3G / 75Z-3G N 57Z / 75Z / 57Z-2G / 75Z-2G N This catalog represents less than 5% of our products. For your application, contact us at [email protected] 8-4 Impedance Matching Transformers Model Frequency Range Impedance* Attenuation Loss (maximum) VSWR (maximum) Input Power 57ZT 0.5-600 MHz 50 Ohms male 75 Ohms female 0.75 dB 0.5-300 MHz 1 dB 300-600 MHz 1.3:1 0.5-3 MHz 1.2:1 3-300 MHz 1.3:1 300-600 MHz 1 Watt average 1000 Watts peak 75ZT 0.5-600 MHz 75 Ohms male 50 Ohms female 0.75 dB 0.5-300 MHz 1 dB 300-600 MHz 1.3:1 0.5-3 MHz 1.2:1 3-300 MHz 1.3:1 300-600 MHz 1 Watt average 1000 Watts peak 57ZT-1G 0.5-1000 MHz 50 Ohms male 75 Ohms female 0.75 dB 0.5-300 MHz 1.2 dB 300-1000 MHz 1.3:1 0.5-3 MHz 1.2:1 3-300 MHz 1.3:1 300-1000 MHz 1 Watt average 1000 Watts peak 75ZT-1G 0.5-1000 MHz 75 Ohms male 50 Ohms female 0.75 dB 0.5-300 MHz 1.2 dB 300-1000 MHz 1.3:1 0.5-3 MHz 1.2:1 3-300 MHz 1.3:1 300-1000 MHz 1 Watt average 1000 Watts peak 57ZTT-AA 800-2200 MHz 50 Ohms male 75 Ohms female 0.5 dB 1.3:1 20 Watts average 75ZTT-AA 800-2200 MHz 75 Ohms male 50 Ohms female 0.5 dB 1.3:1 20 Watts average * Other Impedances available - please contact the factory Common Specifications Operating Temperature RF Connectors - 50 Ohm Side RF Connectors - 75 Ohm Side -20° C to +85° C BNC, TNC, N or SMA BNC, F, N or TNC 57ZT / 75ZT / 57ZT-1G / 75ZT-1G BU www Y ONLI N .jfwin dust E AT ries. com 57ZTT-AA / 75ZTT-AA Custom RF designs at catalog prices | No NRE charges | Email [email protected] 8-5 RF Detectors 50 Ohm Model Frequency Range VSWR (maximun) Flatness RF Input Power (maximum) Output Capacitance 50D-050 1-1000 MHz 1.2:1 ± 0.2 dB 100 mW 1000 pF 50D-051 1-2000 MHz 1.2:1 1-1000 MHz 1.3:1 1000-2000 MHz ± 0.3 dB 100 mW 1000 pF 50D-052 1-3000 MHz 1.2:1 1-1000 MHz 1.3:1 1000-2000 MHz 1.4:1 2000-3000 MHz ± 0.2 dB 1-500 MHz ± 0.3 dB 500-2000 MHz ± 0.5 dB 2000-3000 MHz 100 mW 1000 pF Common Specifications Impedance RF Input Connector DC Output Connector DC Output Polarity 50 Ohms N, BNC, TNC or SMA male or female BNC, N, SMA or TNC female Negative or Positive (please specify) Note: Detector output voltage will be either positive or negative based on which polarity of detector is ordered. 50D-051 / 50D-052 50D-050 Typical Input vs. vs Output Voltage for 50 50D-050/50D-051/50D-052 TypicalPower Input Power . Output Voltage for D-050 /50 D-051 /50 D-052 3 +20 dBm 2.65 V 2.5 Output V oltage (V olts ) 2 1.5 +10 dBm 840 mV 1 -20 dBm 5 mV 0.5 +0 dBm 220 mV -10 dBm 50 mV 0 -20 -15 -10 -5 0 5 10 15 20 Input Power (dBm @ 5 MHz ) This catalog represents less than 5% of our products. For your application, contact us at [email protected] 8-6 RF Detectors 75 Ohm Model Frequency Range VSWR (maximun) Flatness RF Input Power (maximum) Output Capacitance (nominal) 75D-009 1-1000 MHz 1.2:1 ± 0.2 dB 100 mW 1000 pF 75D-010 1-2200 MHz 1.2:1 1-1000 MHz 1.4:1 1000-2200 MHz ± 0.2 dB 100 mW 1000 pF Common Specifications Impedance RF Input Connector (75 Ohms) DC Output Connector (50 Ohms) DC Output Polarity 75 Ohms BNC, N or F male or female BNC, N, SMA or TNC female Negative or Positive (please specify) Note: Detector output voltage will be either positive or negative based on which polarity of detector is ordered. Typical Input Power vs. Output Voltage Typical Input Power vs . Output Voltagefor for 75D-009/75D-010 75 D-009 /-010 4 3.5 +20 dBm 3.44 V Output V oltage (V olts ) 3 2.5 2 +10 dBm 1.12 V 1.5 +0 dBm 340 mV 1 -20 dBm 10 mV 0.5 -10 dBm 80 mV 0 -20 -15 -10 -5 0 5 10 15 20 Input Power (dBm @ 5 MHz ) Custom RF designs at catalog prices | No NRE charges | Email [email protected] 8-7 Bias Taps Model Impedance Frequency Range VSWR (maximum) Input Power (average) Insertion Loss (maximum) 50BT-014 50 Ohms 800-2500 MHz 1.2:1 2 Watts 0.3 dB 50BT-017 50 Ohms 100-1750 MHz 1.4:1 100-300 MHz 1.3:1 300-1750 MHz 2 Watts 1.25 dB 50BT-029 50 Ohms 250-3000 MHz 1.5:1 250-500 MHz 1.3:1 500-3000 MHz 1 Watt 0.5 dB 75BT-007 75 Ohms 100-1750 MHz 1.4:1 100-300 MHz 1.3:1 300-1750 MHz 2 Watts 1.25 dB 75BT-013 75 Ohms 5-2150 MHz 1.25:1 1 Watt 0.4 dB Model RF Connectors DC Voltage DC Current Operating Temperature 50BT-014 BNC, N, SMA or TNC male or female 150 Volts 5 Amps -55° C to +85° C 50BT-017 BNC, N, SMA or TNC male or female 200 Volts 2 Amps -55° C to +85° C 50BT-029 BNC, N, SMA or TNC male or female 100 Volts 1 Amp -55° C to +85° C 75BT-007 F or BNC female 200 Volts 2 Amps -55° C to +85° C 75BT-013 BNC, F, or N male or female 50 Volts 1 Amp -55º C to +85º C 50BT-029 / 75BT-007 / 75BT-013 50BT-014 / 50BT-017 S-6-F 02-17-12 Cat Sep 2011 This catalog represents less than 5% of our products. For your application, contact us at [email protected] 8-8 Feedthru Terminations Model Frequency Range Impedance VSWR (maximum) 50L-001 DC-1000 MHz 50 Ohms 1.1:1 DC-500 MHz 1.2:1 500-1000 MHz 50L-026 DC-1000 MHz 50 Ohms 75L-001 DC-500 MHz 75L-004 DC-1000 MHz RF Input Power Operating Temperature RF Connectors 1 Watt average 1000 Watts peak -20° C to +100° C BNC male / BNC female 1.2:1 2 Watts average 500 Watts peak -20° C to +100° C BNC male / BNC female 75 Ohms 1.2:1 1 Watt average 1000 Watts peak -20° C to +100° C BNC male / BNC female 75 Ohms 1.2:1 DC-500 MHz 1.4:1 500-1000 MHz 1 Watt average 1000 Watts peak -20° C to +100° C BNC male / BNC female 50L-026 / 75L-004 50L-001 / 75L-001 Custom RF designs at catalog prices | No NRE charges | Email [email protected] 8-9 S-6-F 06-07-13 Cat Sep 2011 RF Fuse Holders Model 50RF-037 50RF-038 Frequency Range DC-1000 MHz DC-1000 MHz Impedance Insertion Loss VSWR Common to Fuse Element Connectors 50 Ohms with 1/16 amp fuse <2.0 dB @ 1000 MHz with 1/8 amp fuse <0.5 dB @ 1000 MHz with 1/4 amp fuse <0.3 dB @ 1000 MHz with 1/16 amp fuse 1.5:1 DC-500 MHz 1.6:1 500-1000 MHz with 1/8 amp fuse 1.2:1 DC-500 MHz 1.4:1 500-1000 MHz with 1/4 amp fuse 1.2:1 DC-500 MHz 1.4:1 500-1000 MHz N male / N female 50 Ohms with 1/16 amp fuse <2.0 dB @ 1000 MHz with 1/8 amp fuse <0.5 dB @ 1000 MHz with 1/4 amp fuse <0.3 dB @ 1000 MHz with 1/16 amp fuse 1.5:1 DC-500 MHz 1.6:1 500-1000 MHz with 1/8 amp fuse 1.2:1 DC-500 MHz 1.4:1 500-1000 MHz with 1/4 amp fuse 1.2:1 DC-500 MHz 1.4:1 500-1000 MHz BNC male / BNC female Fuse Rating 100% of rated current 200% of rated current Fusing Level 1/16 A 4 hours minimum 1 second maximum (0.015 seconds typical) +23 dBm (195 mW) 1/8 A 4 hours minimum 1 second maximum (0.04 seconds typical) +29 dBm (785 mW) 1/4 A 4 hours minimum 1 second maximum (0.10 seconds typical) +35 dBm (3.13 Watts) 50RF-037 50RF-038 This catalog represents less than 5% of our products. For your application, contact us at [email protected] 8-10 DC Cable Assemblies Model Description Mating Connector 016-168-XX * 10 pin ribbon cable female / female T & B 609-1057 male and 3M #3793-5303 male 016-306-XX * 10 pin ribbon cable female / open wires T & B 609-1057 male and 3M #3793-5303 male 016-551-XX * D-subminiature 9 pin (DE-9S) female / female D-subminiature 9 pin male (DE-9P) 016-552-XX * D-subminiature 9 pin (DE-9S) female / open wires D-subminiature 9 pin male (DE-9P) 016-554-XX * 4 pin Molex female / female Molex #22-12-2044 male 016-330-XX * 4 pin Molex female / open wires Molex #22-12-2044 male * (xx) insert length in inches Custom RF designs at catalog prices | No NRE charges | Email [email protected] 8-11 S-6-F 02-06-14 Cat Sep 2011