HDA1040S-G 10.4”, SVGA (800 X600) , LED Driver Dimensional Drawing Features Features Viewing Angle(H/Vl)........................................140/110 degrees High Contrast....................................................................500:1 Fast Response Time(R/F)............................................20 msec Built-in LED Driver.................................................................... LVDS Interface Logic............................................................... Touch screen ..............................................................optional Physical Data Module Size....................................243.0W x185.6H x7.3T mm Active Area Size......................................211.2 W x158.0 H mm Dot Pitch..................................................0.264W x 0.264H mm Weight.................................................................................TBD Power Supply VCC VDD 800x600 3.3V (TFT) 12V GND Electrical Characteristics (VDD=3.3±0.125V 25°C) PARAMETER SYM CONDITION MIN TYP PARAMETER SYMBOL MIN V CC CURRENT OF BACKLIGHT IB -0.5 - OPERATING TEMPERATURE T OP STORAGE TEMPERATURE T STG MAX UNIT 5.0 TBD V mA -20 +70 °C -30 +80 °C UNIT OPERATING VOLTAGE V DD - 3.0 3.3 3.6 V POWER SUPPLY (LED) VLED - - 12 - V - 100 - 600 mV - - 1.40 V - TBD - mA mA INPUT DIF. VOLTAGE (LVDS) V ID INPUT COM. MODE VOLT. V CM OPERATING CURRENT I DD VDD = 3.3V OPEATING CURRENT (LED) IWLED - POWER CONSUMPTION P BRIGHTNESS L - TBD - 400 TBD 500 - Pin Connections PIN NO. SYMBOL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VDD VDD GND GND RxIN0 RxIN0+ GND RxIN1 RxIN1+ GND RxIN2 RxIN2 + GND RxCLKIN RxCLKIN GND NC NC NC NC FUNCTION H/L H/L H/L H/L H/L H/L H/L H/L - +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS (-) - chanel 0 LVDS (+) - chanel 0 Ground LVDS (-) - chanel 1 LVDS (+) - chanel 1 Ground LVDS (-) - chanel 2 LVDS (+) - chanel 2 Ground LVDS ( - ) - Clock LVDS ( - ) - Clock Ground No Connection No Connection No Connection No Connection Absolute Maximum Ratings Ratings Absolute Maximum SUPPLY VOLTAGE MAX Pin Connections (Backlight) PIN NO. 1 2 3 4 5 SYMBOL VCC GND ON/OFF Dimming GND FUNCTION H/L - - +12V Power Supply Ground Backlight ON/OFF Brightness Adjustment Input Ground - W cd/m2 HDA1040S-G Dimensional Drawing 10.4”, SVGA (800 X600) , LED Driver