SS52 THRU SS520 R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 200 Volts Forward Current - 5.0Amperes S E M I C O N D U C T O R FEATURES SMC(DO-214AB) Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.245(6.22) 0.220(5.59) For surface mount applications Low power loss ,high efficiency 0.128(3.25) 0.108(2.75) High current capability ,Low forward voltage drop Low profile package Built-in strain relief ,ideal for automated placement 0.280(7.11) 0.260(6.60) For use in low voltage ,high frequency inverters, free wheeling ,and polarity protection applications 0.012(0.305) 0.006(0.152) High temperature soldering guaranteed:260 C/10 seconds at terminals Component in accordance to RoHS 2002/95/EC and 0.103(2.62) 0.079(2.00) WEEE 2002/96/EC MECHANICAL DATA 0.008(0.203) MAX 0.060(1.52) 0.030(0.76) Case: JEDEC SMC(DO-214AB) molded plastic body 0.320(8.13) 0.305(7.75) Terminals: solder plated ,solderable per MIL-STD-750,method 2026 Polarity: color band denotes cathode end Dimensions in inches and (millimeters) Weight: 0.007ounce,0.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols SS 52 SS 53 SS 54 SS 55 SS 56 SS 58 SS 510 SS 515 SS 520 20 30 40 50 60 80 100 150 200 14 21 28 35 42 57 71 105 140 20 30 40 50 60 80 100 150 200 Units Maximum DC blocking voltage VRRM VRMS VDC Maximum average forward rectified current 0.375"(9.5mm) lead length(see fig.1) I(AV) 5.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method at rated TL) IFSM 150.0 Amps Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum instantaneous forward voltage at 5.0 A(Note 1 ) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C T A =100 C Typical junction capacitance(Note 3) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: 1.Pulse test: 300 VF 0.55 0.70 0.85 0.90 0.95 0.2 IR 50 CJ R JA R JL TJ TSTG 10 500 400 mA PF C/W -65 to+150 C -65 to+150 C s pulse width,1% duty cycle 3.Measured at 1MHz and reverse voltage of 4.0 volts 1-50 Volts 55.0 17.0 2. P.C.B. mounted 0.55X0.55"(14X14mm) copper pad areas JINAN JINGHENG ELECTRONICS CO., LTD. Volts Volts Volts HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES SS52 THRU SS520 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 5.0 150 4.0 P.C.B.mounted on 3.0 PEAK FORWARD SURGE CURRENT(AMPERES) copper pad areash 2.0 1.0 0 0 20 40 60 TJ=TJMAX 120 0.55 X 0.55"(14 X 14mm) 80 100 120 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 90 60 30 0 LEAD TEMPERATURE ( C) 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 TJ=125 C 10 TJ=150 C 10 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT( AMPERES) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PULSE WIDTH=300 S 1% DUTY CYCLE 1 TJ=25 C 0.1 SS52-SS54 SS55-SS520 TJ=125 C 1 TJ=75 C 0.1 0.01 TJ=25 C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 SS52-SS54 1.6 SS55-SS520 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 1000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 100 SS52-SS54 SS55-SS520 10 0.1 1 10 100 10 1 0.1 0.01 REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 100 0.1 1 10 100 T, PULSE DURATION ,sec. 1-51 HTTP://WWW.JINGHENGGROUP.COM