SR1535 THRU SR15200 (SINGLE CHIP) R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 35 to 200 Volts Forward Current - 15Amperes S E M I C O N D U C T O R FEATURES TO-263 D2PAK Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction Guard ring for overvoltage protection Low power loss ,high efficiency JF S R2 10 55 60 High current capability ,Low forward voltage drop Single rectifier construction 0.420(10.67) 0.380(9.65) 0.190(4.83) 0.160(4.06) High surge capability 0.245(6.22) MIN For use in low voltage ,high frequency inverters, 0.055(1.40) 0.045(1.14) free wheeling ,and polarity protection applications 0.066(1.68) 0.036(0.92) High temperature soldering guaranteed:260 C/10 seconds, 0.360(9.14) 0.25"(6.35mm)from case 0.639(16.22) 0.560(14.22) 0.320(8.13) 1 Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC K 2 0.053(1.34) 0.047(1.20) MECHANICAL DATA 0.131(3.32) 0.090(2.29) 0.095(2.41) 0.037(0.94) 0.027(0.69) 0.083(2.10) Case: JEDEC TO-263 molded plastic body 0.134(3.40) 0.105(2.67) Terminals: Solderable per MIL-STD-202,method 208 Polarity: As marked Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig.1 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 15 A Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T C =25 C T C =125 C 100 150 200 42 70 105 140 60 100 150 200 SR 1550 SR 1560 35 45 50 60 35 50 25 32 35 45 SR 15100 Units Volts Volts Volts I(AV) 15.0 Amps IFSM 150.0 Amps VF IR R Operating junction temperature range TJ TSTG Notes: 1.Pulse test: 300 SR 15200 SR 1545 VRRM VRMS VDC Typical thermal resistance (Note 2) Storage temperature range SR 15150 SR 1535 0.60 0.75 0.90 0.85 0.95 Volts 0.2 30 50 3.0 JC mA C/W -65 to+150 C -65 to+150 C s pulse width,1% duty cycle 2.Thermal resistance from junction to case JINAN JINGHENG ELECTRONICS CO., LTD. 1-112 HTTP://WWW.JINGHENGGROUP.COM 0.018(0.46) 0.014(0.35) RATINGS AND CHARACTERISTIC CURVES SR1535 THRU SR15200(SINGLE CHIP) FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25 175 RESISTIVE OR INDUCTVE LOAD 20 TJ=TJMAX 150 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 15 10 5 0 0 50 100 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 125 100 75 50 25 LEAD TEMPERATURE ( C) 1 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 SR1535 -- SR1545 INSTANTANEOUS REVERSE CURRENT (mA) 10 INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz 10 TJ=125 C PULSE WIDTH=300 S 1% DUTY CYCLE TJ=25 C 1 0.1 SR1550 - SR15200 TJ=125 C 1 0.1 TJ=75 C 0.01 SR1535 -- SR1545 SR1550 - SR15200 0.01 TJ=25 C 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.001 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SR1535 -- SR1545 SR1550 - SR15200 100 40 0.1 1 10 10 1 0.1 0.01 100 0.1 1 10 100 T, PULSE DURATION ,sec. REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 100 1-113 HTTP://WWW.JINGHENGGROUP.COM