KR Electronics, Inc. KR Electronics, Inc. www.krfilters.com General Description Features KR Electronics part number 2629-40-1 is a 160 MHz bandpass 160 MHz Bandpass filters with a minimum 3 dB bandwidth of 40 MHz. Other pass 40 MHz min 3 dB Bandwidth band frequencies are available. Also available in a surface mount High Stopband Attenuation package. Please consult the factory. 50 Source and Load Surface Mount Typical Performance Passband Amplitude & Group Delay Overall Response (1 dB/div and 10 nsec/div) (10 dB/div) 10 Nov 2009 14:39:47 CH1 CH3 S21 S12 LOG DEL 1 dB/ 10 ns/ REF 0 dB REF 20 ns 10 Nov 2009 14:38:07 CH1 S21 LOG 10 dB/ REF 0 dB Cor Cor Smo Cor CENTER 160 . 000 000 MHz KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2009, KR Electronics, Inc. 2629-40-1, Rev 0, November 10, 2009 SPAN 45 . 000 000 MHz CENTER 160 . 000 000 MHz SPAN Web Email Phone Fax 300 . 000 000 MHz www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 1 KR Electronics, Inc. www.krfilters.com KR Electronics 2629-40-1 Bandpass Specifications Parameter Specification Filter type Bandpass Center Frequency 160 MHz Insertion Loss 3 dB Bandwidth < 4 dB (< 2 dB Typical) > 40 MHz Attenuation at 125 MHz > 50 dB Attenuation at 195 MHz > 50 dB Source & Load 50 Physical Dimensions Notes: 1. Surface mount package, metal cover 2. Dimensions in inches 3. Max reflow temperature 209° C for 10 sec 4. If boards are cleaned after installation units must be completely dried 5. Also available in metal case with SMA connectors KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2009, KR Electronics, Inc. 2629-40-1, Rev 0, November 10, 2009 Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 2