Adapter for Aromat HB2E Relay w/SM Type TX2SA FEATURES • A cost-effective means of upgrading to SOIC without changing your PCB layout. • Available on 0.300 [7.62] centers. GENERAL SPECIFICATIONS • BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides • PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • PIN PLATING: 200µ [5.08µ] 93/7 Sn/Pb per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 • OPERATING TEMPERATURE: 221ºF [105ºC] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N 08-305984-10 Standard Polarity Adapter P/N 08-305984-11 Standard Polarity Adapter with Aries-supplied TX2SA-12V Relay mounted P/N 08-307472-10 Reverse Polarity Adapter P/N 08-307472-11 Reverse Polarity Adapter with Aries-supplied TX2SA-12V Relay mounted Standard Polarity Connection List 08-305084-10 Top TX Pad Bottom HB Pin 1 3 3 1 4 8 5 2 8 15 9 9 10 16 12 14 Reverse Polarity Connection List 08-307472-10 Top TX Pad Bottom HB Pin 1 14 3 1 4 8 5 2 8 15 9 9 10 16 12 3 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18086 Rev. AB