RKT-C3305 TRIMMER POTENTIOMETER-3mm SMD Single-Turn/ Cermet/ Open Frame Recommended for reflow processing Rotor design compatible with automatic adjustment equipment Supplied in 8mm embossed tape, compatible with automatic assembly equipment 3mm size meets EIA/EIAJ standard trimmer footprint Electrical Characteristics Common Dimensions 10Ω to 1MΩ (see standard resistance table) Standard Resistance Range Resistance Tolerance ±25% Adjustment Angle 220℃ ± 20℃ Residual Resistance =<1K, 20Ω>1K, 2%) Environmental Characteristics Power Rating (Max Working Voltage) 50V 70℃ 0.1Watt Temperature Range -55℃ to +125℃ Temperature Coefficient ±250ppm/℃ Rotational Life ±10% 1000 hours 0.1Watt 70℃ +5% Load Life Contact Resistance Variation 5% max Physical Characteristics Torque (Operating) Soldering Conditions 20~200gf. Cm 220℃ to 240℃ And within 5 seconds Marking Resistance Code Standard Packing 2000 PCS / 7” REEL Aqueous cleaning not recommended How to Order RKT – C 3 3 05 – 101 - R Series Chip External Dimensions 3 solder Model Resistance Code RoHS Resistance Table Resistance(Ohms) Resistance Code 100 220 330 470 500 1,000 2,200 3,300 4,700 1,000,000 101 221 331 471 501 102 222 332 472 105 Kingtronics® International Company Tel: (852) 8106 7033 Fax: (852) 8106 7099 Website: www.kingtronics.com Email: [email protected] RKT-C3305 RKT-C3305 TRIMMER POTENTIOMETER-3mm SMD Common Dimensions Note: Specification are subject to change without notice. Kingtronics® International Company Tel: (852) 8106 7033 Fax: (852) 8106 7099 Website: www.kingtronics.com Email: [email protected]