RKT-3361-1/4’’ SQUARE SMD TRIMMING POTENTIOMETER Single-Turn/ Cermet/ Industrial/ Sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning processes Compatible with surface mount manufacturing processes Electrical Characteristics Common Dimensions 10Ω - 2MΩ Standard Resistance Range Resistance Tolerance (see standard resistance table) RKT-3361P RKT-3361S Recommended Land Pattren Recommended Land Pattern ±10% std (tighter tolerance available) ≤10Ω(100Ω≤R≤1K) Absolute Minimum Resistance Contact Resistance Variation ≤1%R(R＞1K) 3% or 3 ohms max (whichever is greater) Adjustability Voltage ±0.05% Resistance ±0.15% Resolution infinite Insulation Resistance 220VDC Dielectric Strength Sea Level 900 vac 80,000 Feet 350 vac Adjustment Angle 240 nom Environmental Characteristics Maximum Soldering Exposure (Temp/Time) +245℃ / 10 seconds. Power Rating (300 volts max) 70℃ -0.25 watt & 125℃ -0 watt Temperature Range -55℃ to +125℃ Seal Test 85℃ Fluorinert Method 103 96 hours Humidity (2% TR; 10 Megohms IR) Vibration 30 G (1% TR; 1% VR) Shock 100 G (1% TR; 1% VR) 1000 hours 0.5 watt @70℃ Load Life (3% TR; 3% or 3 ohms. whichever is greater CRV) 200 cycles (4% TR; 3% or 3 ohms. Rotational Life whichever is greater CRV) Physical Characteristics Mechanical Angle 260°±10° Torque 3.0oz-in. max Stop Strength 7.0oz-in. max Terminals Solderable pins Weight 0.02 oz Resistance Code, Terminal numbers, Marking manufacturers model number style and date code Wiper 50% (Actual TR) ±10% Standard Packaging 50/pcs per tube Adjustment Tool H-90 DIMENSIONS ARE: MM (INCHES) TOLERANCES: ±0.25 (0.010) ESCEPT WHERE NOTED Note: Specification are subject to change without notice. Kingtronics® International Company Tel: (852) 8106 7033 Fax: (852) 8106 7099 Website: www.kingtronics.com Email: [email protected]