BCM5764M ® INTEGRATED GIGABIT ETHERNET CONTROLLER SUMMARY OF BENEFITS FEATURES • Integrated 10/100/1000BASE-T transceiver • • • • • • 10/100/1000BASE-T triple-speed MAC • State-of-the-art physical layer interface that exceeds IEEE requirements • SMBus 2.0 controller • On-chip voltage regulation • Wake-on-LAN (WOL) power switching circuit PCI Express® host interface • x1 PCIe™ v1.1 • Active state power management (ASPM) capability • Message signal interrupt (MSI) Intelligent power management • Centralized power management enables easy and efficient control of various power modes. • Innovative implementation that optimizes power consumption dynamically and transparently, depending on network and system states. • Policy-based implementation allows easy system integration and enables OEMs to differentiate. Performance features • TCP, IP, and UDP checksum offload (CSO) • Receive-side scaling (RSS) for multicore client processors • IPV4 and IPV6 Microsoft® Large Send Offload (LSO) • Interrupt coalescing Industry-compliant Web services-based manageability • Robust ACPI-compliant WOL • Alert Standard Format (ASF) 2.0 support Complies with IEEE standards • Statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB (IEEE 802.3z, Clause 30). • Complies with IEEE 802.3™, 802.3u, 802.3ab, and 802.1p. • Single-chip device for LAN on Motherboard (LOM) and • • • • • • • network interface card (NIC) applications Proven technology built on 10 generations of controller products Wirespeed performance increases user performance • PCI Express provides wirespeed non-blocking throughput. • TCP/IP offloads significantly reduce CPU usage and increase network throughput for large file download. Extremely low power consumption enables environmentfriendly designs • Increases battery life in mobile applications and saves energy in desktop implementations. • Advanced power management capabilities with ASPM L0s, L1, and PCIE CLKREQ • ENERGY STAR compliant Industry's smallest GbE form factor enables easier motherboard design • 10 x 10 mm, 68-pin QFN package Lower BOM cost and chip cost, reducing overall cost of solution • 65 nm process • Self-boot feature, utilizing smaller EEPROM size • Serial NVRAM interface with flash autosensing • Serial flash memory support Supports iSCSI boot • Attractive for client deployments (mobile and desktop) • Allows for diskless boot • Eliminates drives—disk failure is #1 failure for computer systems. • Storage consolidation - Unifies and simplifies management and backup - Increases disk capacity utilization - Allows easier mirroring of data for disaster recovery (DR). • Manageability - Easier remote boot - Allows for a readily available technical toolbox. Secure alerting and power cycling reduces IT costs • ASF 2.0 support for standards-based alerting—IT managers receive automatic alerts when PC support issues occur . • Remote power-on/off features allow IT managers to power cycle PCs to address issues. • Hardware-based authentication and random number generation ensures the highest level of security possible. OVERVIEW TXDP BIAS RDAC TXDN RXDP Buffer Memory Ethernet Transceiver RXDN REFCLK+ ENERGY_DET TRD[3:0]+/- PCI Express REFCLK- Media Access Controller (MAC) PERST# CPU WAKE# CLKREQ# LED Control SPD1000LED#, SPD100LED# LINKLED#, TRAFFICLED# GRC Registers SI, SO, CS#, SCLK DMA Status XTAL_I Clock Generation XTAL_O I/O Control Control VMAIN_PRSNT SMB_CLK, SMB_DATA GPIO[2:0] PCI Config Regulator Control (1/2V Core) PHY MII Regulator Control (1/2V I/O) LOW_PWR Power-On Reset (POR) EECLK, EEDATA VAUX_PRSNT REGCTL12 REGOUT12_IO Functional Block Diagram The BCM5764M is a Broadcom® NetXtreme® eleventh-generation 10/ 100/1000-Mbit BASE-T Ethernet LAN controller solution for highperformance network applications. The device combines a triple-speed IEEE 802.3-compliant media access controller (MAC) with a triplespeed Ethernet transceiver, x1 PCIe™ bus interface, and on-chip buffer memory in a single device. The BCM5764M is fabricated in a 1.2V CMOS process, providing a low-power system solution. The device performs all the physical layer functions for 1000BASE-T, 100BASE-T, and 10BASE-T Ethernet on standard Category 5 UTP cable. Based on proven DSP technology, the device is a highly integrated solution combining digital adaptive equalizers, ADCs, PLLs, line drivers, echo cancellers, crosstalk cancellers, and all other required support circuitry. A full-featured MAC provides full/half-duplex capability at all speeds. The on-chip high-performance processor enables custom frame processing features. Target applications: • Desktop and mobile PC LOM Software drivers available: • Windows®, 2000, XP, and Vista® • Linux® 2.4, and 2.6 Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo, NetXtreme®, and the NetXtreme logo, are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 5300 California Avenue Irvine, California 92617 © 2009 by BROADCOM CORPORATION. All rights reserved. 5764M-PB01-R 06/03/09 Phone: 949-926-5000 Fax: 949-926-5203 E-mail: [email protected] Web: www.broadcom.com