SMD Inductor for Power Line PIN Series PIN2510 No Polarity

LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
Features:
Low profile
Low RDC to provide low loss solution.
Miniaturized size for tiny portable DC to DC converter line.
Flat bottom surface for secure and reliable mounting.
Packaging is designed for auto mounting machine
This series is in compliance with RoHS Directive, Halogen free, and compatible with lead-free solders.
Applications:
Low profile/ low DC resistance suitable for Portable telephones, hard disk drives, PDA, DSC and other electronic
equipments.
Product Identification:
Schematic:
PIN 2510 – 4R7 M
1
2
3
4
1.
Series : PIN=Power Inductor without shielding(None shielding)
2.
Dimension Code: L x W x H=2.5mm x 2.5mm x 1.05mm
3.
Inductance Value
4.
Tolerance
4R7=4.7uH
No Polarity
M=±20% , N=±30%
Dimension(mm):
B
B
2.5±0.2
C
C
1.05 max.
1.2
0.85
B : 2.5±0.2
D
0.8
2.5±0.2
A : 2.5±0.2
2.5
2.50
1.2
D
0.85
AA
1.2
0.8
1.2
Recommended layout
51
C : 1.05 max.
D : 0.85 ref.
LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
Electrical Characteristics
Product Part
Inductance
Number
(uH)/MHz
PIN2510-R68T
0.68/1
PIN2510-1R0T
1.0/1
PIN2510-1R5T
1.5/1
PIN2510-2R2T
2.2/1
PIN2510-3R3T
3.3/1
PIN2510-4R7T
4.7/1
PIN2510-5R6T
5.6/1
PIN2510-6R8T
6.8/1
PIN2510-8R2T
8.2/1
PIN2510-100T
10/1
PIN2510-220T
22/1
1.
Tolerance
Rdc Typ.
Idc (mA) Typ.
Irms (mA) Typ.
(Ω)
L ↓ 30%
T ↑ 40°C
0.100
2500
2100
0.085
2300
1900
0.115
1900
1500
0.168
1500
1200
0.249
1300
1100
0.316
1100
900
0.420
980
830
0.487
900
800
0.548
840
710
0.610
790
680
1.552
510
400
(±%)
M
N
M
N
M
N
M
N
M
N
M
N
M
N
M
N
M
N
M
N
M
N
When ordering, please specify tolerance codes. Ex: PIN2510-4R7M
Tolerance : M=±20% , N =± 30%
2.
L, Idc : Agilent/HP 4284A , 1MHz with 200mV.
3.
Rdc : DIGITAL MILLIOHM METER Chroma 16502, or equivalent.(Typ:
4.
Idc: DC current at which the inductance drops 30% from its value without current.
5.
Irms: Current that causes a 40°C temperature r ise from 25°C ambient.
6.
Operating temperature range from -25℃ to 105℃.
52
±20% tolerance)
LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
Characteristics(Reference)
Inductance vs. DC current
Temperature Change v.s. D.C. current
53
LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
Inductance v.s. Frequency
PIN2510-100N
PIN2510-220N
L(uH)
1
10
100
Frequency(MHz)
54
1000
LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
Packaging Information
1.
Tape dimensions
Ko
P1
P0
P
W
Bo
t
Ao
( Dimensions in mm; Tolerance：±0.1)
Symbol
W
P
P0
P1
Ao
Bo
Ko
t
Dimension
8
4
4
2
2.7
2.7
1.15
0.22
2.
Reel dimensions
D
( Dimensions in mm )
C
B
A
E
55
Symbol
T
A
178±1
B
60.2±0.5
C
13±0.5
D
16±0.5
E
13.2±1.5
LinkCom Manufacturing Co.,Ltd
SMD Inductor for Power Line
PIN Series PIN2510
3.
Tapping figure
Top cover tape
Carrier tape
Sprocket hole
Cavity (chip insert)
4.
Direction of Unreeling
There is no continuation more than two vacancies of the product.
(360 mm)
Blank
Chip
Blank
(25 pitches)
Leader.
(25 pitches)
Material of carrier tape : Polystyrene
Material of cover tape : Polyester
5.
Cover Tape Peel Strength
The force for tearing off cover tape is 0.1~0.6(N) in the arrow direction at the following conditions:
Temperature : 5 ~ 35℃
Humidity : 45 ~ 85%
Atmospheric pressure : 860 ~ 1060 hpa
160 ~ 180。
Top cover tape
Base tape
6.
Packing Quantity
Parts/Reel: 2000/7’’ Tape Width: 12mm
56