LED Variable-Mount Shoebox Luminaire for Area Lighting SLL003-800-TPW-10/30VM3 Consumes Only 47 Watts – Replaces 125 to 150-Watt Metal Halide Fixtures – Over 65% Energy Savings 10VDC to 30VDC – Ideal for Solar Applications — Typical Mounting Height: 16-20 feet ■FEATURES ■APPLICATIONS Warranty: 5 Years ■■ Low Power Consumed: 47 Watts ■■ Long Life: White LEDs Last for up to 50,000+ Hours of Continuous Operation ■■ ■■ Optimized Circuitry: Adapts to Fluctuations in Low DC Voltage ■■ Parking Lots/Structures ■■ Roadway/Street Lighthing ■■ Super Intensity: 3,684 Candelas ■■ Building Mounts Meets IP65 Requirements: Totally Protected against Dust and Low-Pressure Jets of Water from All Directions. Limited Ingress Permitted. ■■ Up/Down Spotlighting ■■ ■■ Pole-Mounted Area Lighting ■■ Sign Lighting ■■ For Tunnels, Caves, Mines ■■ Parks/Walkway Illumination ■■ Less Weight: Weighs Only 16 lbs as Compared to 39-42 lbs Conventional Lighting Highest-Grade LEDs: Uses CREE XR-E that Meets LM-79/LM-80 Requirements ■■ Wide Ambient Operating Temp. Range: ~-22°F to ~+122°F ■SPECIFICATIONS Ideal for Use with Alternate or Renewable Energy Resources – Solar & Wind Power SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SLL003-800-TPW-10/30VM3 Emitted Color True White Color Temperature 4800K - 5200K Color Rendering Index 75 Beam Pattern Type III Asymmetrical Viewing Angle 40˚x70˚[Full Beam Width @ 50% Intensity] Power Factor 1.0 Total Lumens 3,780 lm Efficacy 83 lm/W Maximum Candela 3,684 cd @ Hor 90, Ver 15 LED Cath. Temperature 125.2°F / 51.8°C ■BENEFITS ■■ Major Energy Savings: Over 65% Compared to Incandescents ■■ Solid-State: High-Shock & High-Vibration-Resistant ■■ Low Maintenance: Lowers Costs by Reducing Re-lamp Frequency ■■ Instant-On: No Delay in Re-Strike W16.47 x H16.47 x D6.97 inches W418.4 x H418.4 x D177.0 mm Weight 16.2 lbs / 7.35 kg No Hazardous Emissions: No UV or IR Radiation – Does Not Attract Insects; No RF Interference ■■ High CRI Enhances Colors ■■ Reduces Light Pollution: No Wasted Light, “Dark Skies Initiative”-Friendly Enhances Vision: Better Optical Acuity, Little or No Disability Glare as Compared with High Glare from HID Lamps ■■ Cool Operation: Doesn’t Get Hot to the Touch – Minimizes Fire Hazard ■■ Even Lighting: High Intensity / No Halation ■■ Housing: Die-cast aluminum housing and hinged front frame, ½” coin plugs for conduit and photocell, textured architectural bronze powdercoat finish over a chromate conversion coating ■■ Lens: Tempered flat clear glass lens ■■ Fixture is intended for indoor or outdoor use, and designed to protect against windblown dust, rain, splashing and direct hose “washdowns” 16.47” [418.41mm] 6.97” [177.06mm] TESTED @ INPUT CURRENT ENERGY USED 10VDC 4.740A 47.2 Watts 14VDC 3.230A 45.3 Watts 24VDC 1.861A 44.7 Watts ■■ Other Voltages Available 30VDC 1.489A 44.7 Watts ■■ Other LED Colors © 2015 LEDtronics, Inc. ■■ ■■ 16.47” [418.41mm] ■CUSTOM OPTIONS [For qualified applications & large-quantity OEM orders] ■■ ISO Narrow or Wider Viewing Angles 9001:2008 CERTIFIED by DNV ■■ Various Mounting Hardware Available (Ask for Log #283) 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579.4875 / (310) 534.1505 Fax: (310) 534.1424 E-mail: [email protected] Website: ledtronics.com Check LEDTRONICS.COM for latest data. Printed material may be outdated. 10-30VDC Eco-Friendly: No Mercury Content, No Lead ■MATERIALS / CONSTRUCTION ~-22°F to ~+122°F Ambient Operating Temp. ~-30°C to ~+50°C Dimensions ■■ LOG 362 / Rev 06 -2015 PART NO. INPUT VOLTAGE w w w.L E D tro n ic s.co m ■■ Page 2 LED Variable-Mount Shoebox Luminaire for Area Lighting SLL003-800-TPW-10/30VM3 w w w.L E D tro n ic s.co m TEST RESULTS ARE PRELIMINARY — FINALIZED RESULTS UPCOMING © 2011 LEDtronics, Inc.